Craftsman 11585 Operation Manual - Page 10

KNOWYOURDUAL LASERCIRCULARSAW See Figure 1, The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BEVEL ADUSTMENT KNOB The bevel adjustment knob allows you to set the circular saw for bevel cuts from 0 ° to 50 °. DEPTH ADJUSTMENT KNOB The depth adjustment knob adjusts the depth of cut from 0 in. to 2-3/8 in. EDGE GUIDE The edge guide is used when making long or wide rip cuts with the saw. ERGONOMIC DESIGN This tool is designed for comfort and ease of operation in different positions and at different angles. The design of your circular saw helps maintain proper two-hand control during operation. HEX KEY STORAGE This convenient storage area stores your hex key for quick blade changes. LASER GUIDES The laser guides will generate a red laser beam on the work surface in front of and behind the saw when turned on. LOCK=OFF BUTTON The lock-off button reduces the possibility of accidental starting. SPINDLE LOCK BUTTON The spindle lock allows you to secure the blade when turning the blade screw. NOTE: Do not run circular saw with spindle lock engaged. WIDTH OF CUT SCALE When making straight cross cuts or rip cuts, the scale can be used to measure up to 4-1/2 in. on the right side of the blade, and up to one inch on the left side of the blade. UNPACKING This product requires assembly. [] Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the tool carefully to make sure no breakage or damage occurred during shipping. [] Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. [] If any parts are damaged or missing, please call 1-800-932-3188 for assistance. PACKING LIST Dual Laser Circular Saw 7-1/4 in. Blade Edge Guide Hex Key (5 mm) Operator's Manual ,_ WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. A WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. A WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. 10