Home » Cub Cadet Manuals » Lawn Mowers » Cub Cadet CC 800 » Manual Viewer

Cub Cadet CC 800 Operation Manual

Cub Cadet CC 800 Manual

View all Cub Cadet CC 800 manuals

Add to My Manuals
Save this manual to your list of manuals

Cub Cadet CC 800 manual content summary:

Cub Cadet CC 800 | Operation Manual - Page 1
• Service • Troubleshooting • Warranty Operator's Manual 33" Wide Cut Mower - CC 760 & CC 760 ES WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. CUB CADET LLC
Cub Cadet CC 800 | Operation Manual - Page 2
parts/attachments/accessories, or want to view an online How-To video; you can seek help from the experts. Have your full model number and serial number ready. Choose from the options below: ◊ Web: www.cubcadet.com/equipment/cubcadet/service-and-parts ◊ Phone: (800) 965-4CUB ◊ Mail: Cub Cadet
Cub Cadet CC 800 | Operation Manual - Page 3
related accessories contain instructions on the machine and in the manual(s) before operation. Keep this manual in a safe place for future and regular reference and for ordering 7. replacement parts. 2. Be completely familiar with the controls and the proper use To help avoid blade contact or a
Cub Cadet CC 800 | Operation Manual - Page 4
Only use parts and accessories made for this machine by the manufacturer. Failure to do so can result in personal injury. 27. When starting engine, covered in this manual, use care and good judgement. Contact Customer Support for assistance or the name of the nearest service dealer. Slope Operation
Cub Cadet CC 800 | Operation Manual - Page 5
unintended starting. 3. Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., bent, cracked, worn) Replace blade with the original equipment manufacture's (O.E.M.) blade only, listed in this manual. "Use of parts which
Cub Cadet CC 800 | Operation Manual - Page 6
meeting applicable local or state laws (if any). If a spark arrestor is used, it should be maintained in effective working order by the operator. In the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-
Cub Cadet CC 800 | Operation Manual - Page 7
SURFACE Engine parts, especially the muffler, become extremely hot during operation. Allow engine and muffler to cool before touching. WARNING: Your Responsibility-Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on
Cub Cadet CC 800 | Operation Manual - Page 8
8 Slope Gauge Section 2 - Important Safe Operation Practices (OK) Figure 1 15° Slope (TOO STEEP) Figure 2 15° Slope 15° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold
Cub Cadet CC 800 | Operation Manual - Page 9
Operator's Manual (1) • Oil Drain Hose (1) Engine Operator's Manual (1) the Battery Cables (Electric Start Models) NOTE: The positive brace is used for packaging purposes service after the date shown on top/side of battery, charge the battery as instructed in the Service section of this manual
Cub Cadet CC 800 | Operation Manual - Page 10
lower handle. See Figure 3-4. 5. The handle height can be adjusted to any of three positions. For instructions, refer to Handle Height in the Maintenance and Adjustments section on page 21 of this manual. Attaching the Shift Lever 1. Remove the screw (a) and lock nut (b) that secures the shift lever
Cub Cadet CC 800 | Operation Manual - Page 11
the Engine on page 14 in the Operation section of this manual for detailed starting instructions. Engine Refer to the Engine Operator's Manual for details regarding all engine-related controls and features. Deck Height Lever Use this lever to adjust the mowing deck's cutting height. Move the
Cub Cadet CC 800 | Operation Manual - Page 12
drive control before changing speeds. Failure to do so may result in serious damage to your transmission. Use this lever to blades before operating in reverse. Neutral Place the lever in neutral (N) before starting the mower, and when the mower is not in use. In addition, the mower can be manually
Cub Cadet CC 800 | Operation Manual - Page 13
started. Change Oil The LCD will display the letters "CHG", followed by the letters "OIL oil service minder interval will occur every 50 hours for the following two hours. Before the interval expires, change the engine oil as instructed on page 18 in the Maintenance section of this Operator's Manual
Cub Cadet CC 800 | Operation Manual - Page 14
oil level before each use as instructed in the Engine Operator's Manual. Add oil as necessary. Failure to do so may result in serious damage to your engine. Starting the Engine For Mowers Equipped with Electric Start operating. 1. If the blades are engaged, release the blade control. 2. Move the
Cub Cadet CC 800 | Operation Manual - Page 15
Engaging the Drive WARNING! Avoid sudden starts, excessive speed and sudden stops. 1. Start the engine as instructed earlier in this section and move the throttle/choke control into the FAST (rabbit) position. 2. To travel FORWARD: a. Place the gear shift lever in any
Cub Cadet CC 800 | Operation Manual - Page 16
blade timing belt as instructed on page 20 in the Maintenance section of this manual. Repair the damage before starting and operating the mower. Mulching The Cub Cadet blades, stop the engine and remove key (if equipped) to prevent unintended starting. Stop the engine and wait for all parts to
Cub Cadet CC 800 | Operation Manual - Page 17
around Muffler P Lube Front Wheels and Casters P P Lube Pivot Points P P Check Blade Timing Belt P Check Spark Plug Condition & Gap P Replace Spark Plug P Replace Fuel Filter P † Service more frequently when used in dusty areas. †† Every season or 25 hours if operating under heavy
Cub Cadet CC 800 | Operation Manual - Page 18
instructions pertaining to your engine. NOTE: Maintenance, repair, or replacement of the emission control devices and systems which are being done at owner's expense may be performed by any engine repair establishment or individual. Warranty repairs must be performed by a Cub Cadet Dealer. Changing
Cub Cadet CC 800 | Operation Manual - Page 19
Start Models Only) CALIFORNIA PROPOSITION 65 WARNING! Battery posts, terminals, and related accessories Any fuel or oil spilled on the machine part of its deck wash system. Use using the deck wash system, always disengage the blade control, stop engine and remove key to prevent unintended starting
Cub Cadet CC 800 | Operation Manual - Page 20
starting. Pivot Points & Linkage Lubricate all the pivot points on the drive system and lift linkage at least once a season with light oil. The cutting deck spindles are driven by a blade the belt cover installed. Failure to follow this instruction could result in personal injury or property damage.
Cub Cadet CC 800 | Operation Manual - Page 21
adjustments. Handle Height The upper handle is secured to two support bars that can be adjusted to raise or lower the Cub Cadet dealer to have the deck's blade timing belt reset. WARNING! Do not operate the machine without the deck's blade timing belt properly set. Failure to follow this instruction
Cub Cadet CC 800 | Operation Manual - Page 22
Service Cutting Deck Removal WARNING! Before performing any maintenance or repairs, disengage blades, stop engine and remove key (if equipped) to prevent unintended starting under the deck's edge. These will temporarily support the deck as you unmount it. 4. Use the deck height lever to lower the
Cub Cadet CC 800 | Operation Manual - Page 23
deck supports. 11. Use the of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See Figure 7-5. (a) (a) (a) blade(s) for sharpening or replacement. Protect your hands by using heavy gloves when grasping the blades. WARNING! Periodically inspect the blade
Cub Cadet CC 800 | Operation Manual - Page 24
: Use a torque wrench to tighten the blade spindle hex flange nut to between 70 ft-lb and 90 ft-lb. CAUTION: The cutting blades must be installed perpendicular to each other. If the blades cannot be installed perpendicular to each other, the blade timing belt must be reset. See your Cub Cadet dealer
Cub Cadet CC 800 | Operation Manual - Page 25
used in order to change the mower's transmission drive belt. See your Cub Cadet dealer to have the transmission drive belt replaced. Fuse (Electric Start Models Only) WARNING! Before servicing, repairing, or inspecting, always disengage blades use a replacement fuse with the same amperage capacity
Cub Cadet CC 800 | Operation Manual - Page 26
Troubleshooting 8 Problem Engine fails to start Cause 1. Choke not activated. 2. Fuel tank empty, or stale fuel. 3. Blocked fuel line. 4. Faulty spark plug. 5. Engine flooded. 6. Dead battery (electric start models only). Engine runs erratically 7. Blown fuse (electric start models only).
Cub Cadet CC 800 | Operation Manual - Page 27
(Includes Pre-Filter) 951-3013 Fuel Filter 951-12690 Oil Filter 951-12182 Fuel Cap 954-04139 Belt (Mowing Deck Engagement) 942-04154A Deck Blade Phone (800) 828-5500 or (330) 558-7220 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready
Cub Cadet CC 800 | Operation Manual - Page 28
Chute Assembly 631-04252 Mulch Baffle 731-05766 Trail Shield Phone (800) 828-5500 or (330) 558-7220 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also available free of charge at www.troybilt.com. 28
Cub Cadet CC 800 | Operation Manual - Page 29
10 The following attachments and accessories are compatible for the Troy-Bilt Wide Cut Mower. See your Troy-Bilt dealer or the retailer from which you purchased your mower for information regarding price and availability. Model Number Description 19A20001OEM Grass Collector, 33" Mower 29
Cub Cadet CC 800 | Operation Manual - Page 30
soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should contact the MTD Consumer Group Inc Service Department at 1-800-800-7310 or at http://support.mtdproducts.com
Cub Cadet CC 800 | Operation Manual - Page 31
, and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of the part. That notwithstanding, any adjustment of a component that has a factory installed, and properly operating, adjustment limiting device is still eligible for warranty
Cub Cadet CC 800 | Operation Manual - Page 32
or natural disaster. Damage resulting from the installation or use of any part, accessory or attachment not approved by Cub Cadet for use with the product(s) covered by this manual will void your warranty as to any resulting damage. In addition, Cub Cadet may deny warranty coverage if the hour meter