Cub Cadet CC 800 Operation Manual - Page 11

Controls and Features Deck Height Lever Fuel Tank Cap 4 Throttle/Choke Control Blade Control Ignition Switch† LCD Service Minder and Hour Meter† Drive Control Gear Shift Lever † If Equipped Figure 4-1 Lawn Mower controls and features are illustrated in Figure 4-1 and described on the following pages. WARNING! Read and follow all safety rules and instructions in this manual, including the entire Operation section, before attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal injury. Throttle / Choke Control Note: When operating the mower with the cutting deck engaged, be certain that the throttle/choke control is in the Fast position. Choke Fast The throttle /choke control is used to adjust engine speeds, to activate the engine choke and to stop the engine. Always run engine with the throttle /choke control lever in the Fast position for best mower performance. Choke: Use when starting a cold engine. Fast: Use during mower operation. Slow Slow: Use when idling engine. Stop: Stops the engine. (Non-electric start units only). Stop Refer to Starting the Engine on page 14 in the Operation section of this manual for detailed starting instructions. Engine Refer to the Engine Operator's Manual for details regarding all engine-related controls and features. Deck Height Lever Use this lever to adjust the mowing deck's cutting height. Move the lever to the left, then place the lever in the notch best suited for your application. 11