Cub Cadet CC 800 Operation Manual - Page 21
Adjustments
View all Cub Cadet CC 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2. The top of each spindle pulley is marked with an arrow. See Adjustments Figure 6-6. The arrows should be perpendicular (at a 90˚ angle) to each other. WARNING! Shut the engine OFF and remove the ignition key (if equipped) before making adjustments. Handle Height The upper handle is secured to two support bars that can be adjusted to raise or lower the handle height. Adjust if necessary as follows: 1. Remove the upper star knob (a) and carriage screw (b) on the right side of the handle and the left side of the handle. See Figure 6-7. Figure 6-6 3. If the arrows on the surface of each spindle pulley are not perpendicular (at a 90˚ angle) to each other, see your Cub Cadet dealer to have the deck's blade timing belt reset. WARNING! Do not operate the machine without the deck's blade timing belt properly set. Failure to follow this instruction could result in personal injury or property damage. (b) (a) Figure 6-7 2. Pivot the handle forward or rearward to align one of the three holes on each support bar with the holes on the handle. 3. Reinstall the upper star knob (a) and carriage screw (b) on the right side of the handle and the left side of the handle when a comfortable height is achieved. Section 6 - Maintenance & Adjustments 21