Cub Cadet CC 800 Operation Manual - Page 9
Assembly & Set-Up - not starting
View all Cub Cadet CC 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Assembly & Set-Up 3 Contents of Crate • Lawn Mower (1) • • Lawn Mower Operator's Manual (1) • Oil Drain Hose (1) Engine Operator's Manual (1) • Key (1) Mower Set-Up Shipping Brace Removal WARNING! Make sure the lawn mower's engine is OFF. Remove the ignition key (if equipped) before removing the shipping brace. 1. Locate the shipping brace, if present, found on the right side of the cutting deck. See Figure 3-1. Attaching the Battery Cables (Electric Start Models) NOTE: The positive battery terminal is marked Pos. (+). The negative battery terminal is marked Neg. (-). 1. Attach the red cable to the positive(+) battery terminal and the black cable to the negative (-) battery terminal with the bolts (a) and hex nuts (b) attached to the battery cables. See Figure 3-2. (b) (b) (a) ((aa)) Shipping Brace Figure 3-1 2. While holding the discharge chute with your left hand, remove the shipping brace with your right hand by grasping it between your thumb and index finger and rotating it clockwise. WARNING! The shipping brace is used for packaging purposes only. Remove and discard the shipping brace before operating your lawn mower. Figure 3-2 IMPORTANT: Make certain the hold-down rod is in position over the battery, securing it in place and make certain that the red rubber boot covers the positive battery terminal to help protect it from corrosion. NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery as instructed in the Service section of this manual on page 24 prior to operating the mower. WARNING! The mowing deck is capable of throwing objects. Failure to operate the mower without the discharge cover in the proper operating position could result in serious personal injury and/ or property damage. 9