D-Link 3100 24P User Manual - Page 45

DGS-3100 Series Gigabit Stackable Managed Switch User Manual Defining Ports  Configuring Port Properties  Viewing Port Properties Configuring Port Properties The Port Setting Page contains parameters for configuring port or LAG properties. Gigabit ports operate in full duplex mode only, and take on certain characteristics that are different from the other choices listed. The copper ports also support auto MDI/MDIX for cross over cables. To define port parameters: 1. Click Configuration >Port Configuration > Port Setting. The Port Setting Page opens: Figure 2-5 Port Setting Page The Port Setting Page contains the following fields: Field Unit Description Defines the stacking member or LAG for which the port settings are displayed. From Port Defines the port number from which the port configuration will apply.. This field appears only if a unit number is selected in the Unit field. From LAG Defines the LAG number from which the port configuration will apply. This field appears only if LAG is selected in the Unit field. To Port Defines the port number to which ports the configuration will apply. This field appears only if a unit number is selected in the Unit field. To LAG Defines the LAG number to which the port configuration will apply. This field appears only if LAG is selected in the Unit field. State Defines whether the interface interface is currently operational or non-operational. The possible field values are: 31