D-Link 3100 24P User Manual - Page 54
Field, Description, Time Source, Current Time, SNTP First Server, SNTP Second Server - 24 default ip address
UPC - 790069304941
View all D-Link 3100 24P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
DGS-3100 Series Gigabit Stackable Managed Switch User Manual Polling for Time Information SNTP is used to poll time information from SNTP server. Using SNTP enables accurate system clock. The Time Settings Page allows network managers to enable and configure the SNTP time settings on the device. To enable SNTP: 1. Click Configuration > SNTP Settings > Time Settings. The Time Settings Page opens: Figure 2-10 Time Settings Page The Time Settings Page contains the following fields: Status Field Description Time Source Defines the time source by which the system time is set. The possible field values are: SNTP - Indicates that the system time is retrieved from a SNTP server. System Clock - Indicates that the system time is set locally by the device. Current Time Displays the current date and time. SNTP Settings Section Field SNTP First Server Description Defines the IP address of primary SNTP server from which the system time is retrieved. SNTP Second Server Defines the IP address of secondary SNTP server from which the system time is retrieved. SNTP Poll Interval in Seconds Set Current Time Defines the interval (in seconds) at which the SNTP server is polled for Unicast information. The range is 60-86400 seconds. The Poll Interval default is 1024 seconds. Field Time Setting Description Defines the current system date. The field format is Day/Month/Year. Time in HH MM SS Defines the current system time. The field format is HH:MM:SS based on the 24-hour 40