D-Link DCS-3415 User Manual - Page 41
Secondary HTTP, Access name for, stream1, stream2, FTP Port, RTSP Streaming, Authentication
UPC - 790069313752
View all D-Link DCS-3415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Section 4 - Configuration Secondary HTTP The default value is 8080. Port: After you have enabled the Authentication, you will need to configure and use the access name to access your video file. For example, http://camera ip/video.mjpg (video.mjpg is the Access name, you can modify it here) Access name for The default name is video.mjpg. stream1: Access name for The default name is video2.mjpg. stream2: Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG, users will receive continuous JPEG pictures. This technology, known as "server push", allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape. Use http://:/ to make connection. For example, when the access name for stream 1 is set to video.mjpg: 1 : Launch Mozilla Firefox or Netscape. 2 : Type the URL command in the address field. Press Enter. 3 : The JPEG images will be displayed in your web browser. FTP Port: Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60 (if you use port 60 for your FTP server) RTSP Streaming: This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA. Authentication: Choose either Basic where the password is not encrypted, or Digest where the password is encrypted during the transmission to the web server. After you have enabled the Authentication, you will need to configure and use the access name to access your video file. RTSP:// camera ip/live.sdp (live.sdp is the default access name, you can modify it here) Access name for The default name is live.sdp. stream1: Access name for The default name is live2.sdp. stream2: D-Link DCS-3415 User Manual 41