D-Link DCS-3415 User Manual - Page 8
Hardware Overview
UPC - 790069313752
View all D-Link DCS-3415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 1 - Product Overview Microphone Connector: The DCS-3415 has an internal built-in microphone. To use an external microphone, plug it into the microphone connector. Microphone On/Off Switch: Select to turn the microphone On or Off. Audio Out Connector: Use the Audio Out connector for 2-way audio connection. Speakers (not included) may be connected to the camera for 2-way audio communication. Hardware Overview Connections Rear View DC Power Connector The DC power input connector is located on the back panel. This is labeled "12V DC" with a single socket to supply power to the Network Camera. Ethernet Cable Connection (PoE) The network camera's back panel features an RJ-45 connector for 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This port supports the NWay protocol, allowing the network camera to automatically detect or negotiate the transmission speed of the network. The Ethernet port can also be used to power the camera by using a PoE switch. D-Link DCS-3415 User Manual Reset Button Reset is initiated when the reset button is pressed once and held 30 seconds until the power LED flashes through its cycle twice. DI/DO: The DCS-3415 provides a general I/O terminal block. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices. DC12V output : Support for external device (like IR light) RS485: Port is designed for external pan/tilt/zoom devices.