D-Link DCS-3415 User Manual - Page 85
Reset and Restore
UPC - 790069313752
View all D-Link DCS-3415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Appendix B - Reset and Restore Reset and Restore There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the DCS-3415 will return the system back to a normal state. If the system still has problems after reset, restore the factory settings and install again: RESET: 1. 2. Lightly insert a paper clip (or a similar sized tool) into the reset hole on the back of the camera, press lightly and then release the button. The LED on the front of the camera will begin blinking red and green. 3. When the LED stops the blinking the reset has completed. RESTORE: 1. Insert the paperclip or other tool and press on the button continuously. 2. Wait for the LED on the front of the camera to blink red and green and hold the button for 30 seconds. Reset button Restoring the factory defaults will result in the loss of any previous settings and will require running the Installation Wizard to return the DCS-3415 to a normal state. 3. Withdraw the tool after the second cycle of the LED blinking and a factory restore has been completed. D-Link DCS-3415 User Manual 85