D-Link DCS-4701E User Manual - Page 11
Waterproofing Your Installation, Step 1
View all D-Link DCS-4701E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Section 2: Assembly and Installation Waterproofing Your Installation To waterproof your camera installation, follow the instructions below. Round Ethernet cable, a crimping tool, and RJ-45 plugs are required for this procedure. Step 1 Place the washer around the base of the Ethernet connector as shown. Step 2 Thread bare Ethernet cable through the waterproof connector as shown, then crimp an RJ-45 plug onto the cable. D-Link DCS-4701E User Manual 11
11
D-Link DCS-4701E User Manual
Section 2: Assembly and Installation
Waterproofing Your Installation
Step 1
Place the washer around the base of the Ethernet connector as shown.
To waterproof your camera installation, follow the instructions below. Round Ethernet cable, a crimping tool, and RJ-45 plugs
are required for this procedure.
Step 2
Thread bare Ethernet cable through the waterproof connector as shown, then
crimp an RJ-45 plug onto the cable.