D-Link DCS-4701E User Manual - Page 36
Motion Detection, Enable Video Motion, Sensitivity, Draw Motion Area
View all D-Link DCS-4701E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 3: Configuration Motion Detection Motion detection enables the camera to monitor the video feed for movement. Here, you can adjust the sensitivity settings that determine whether motion is detected by the camera or not. After making any changes, click the Save Settings button to save your changes. Enable Video Motion: Select this box to enable the motion detection feature of your camera. Sensitivity: Specifies how sensitive motion detection will be from 0% to 100%. A low sensitivity setting means that there must be large changes between two images in order to detect motion, and a high sensitivity setting means that even small changes will cause motion to be detected. Draw Motion Area: Use your mouse to click and drag on the areas that you would like to monitor for motion. Erase Motion Area: To erase a motion detection area, simply click on the red square that you wish to remove. Right click on the camera image to bring up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-4701E User Manual 36