D-Link DCS-5300G Product Manual - Page 54
Configuration > Advanced >Camera Control Continued, Remove
UPC - 790069269530
View all D-Link DCS-5300G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Using the DCS-5300G with an Internet browser (continued) Configuration > Advanced >Camera Control (Continued) Enable IR Control Current Position Preset Position Dwelling Time - Patrol Selection - Click this to allow the DCS-5300G to be controlled by the included remote. Enter a name for the position at which you would like to preset the DCS-5300G. Click Add to add the new preset position to the Preset Locations list. Using the pull down menu, you can delete a preset position by selecting it and clicking Delete. Set the value of time that the camera will remain on each preset position before moving to the next. The dwelling time can be set between 1 and 255 seconds. To use the Auto Patrol feature, select the desired preset positions from the Preset Locations list and add them to the Selected Locations list by clicking Select. You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking UP or DN. Click Remove to remove a location from the list. Click Apply to make changes effective 54