Home » D-Link Manuals » Webcams » D-Link DCS-950G » Manual Viewer

D-Link DCS-950G Product Manual

D-Link DCS-950G - Network Camera Manual

UPC - 790069270703

View all D-Link DCS-950G manuals

Add to My Manuals
Save this manual to your list of manuals

D-Link DCS-950G manual content summary:

D-Link DCS-950G | Product Manual - Page 1
D-Link DCS-950G | Product Manual - Page 2
...31 LAN ...32 PPPoE ...33 DDNS ...34 Wireless 35 Site Survey 37 Tools ...38 Admin...38 System ...39 Default ...40 Firmware 41 Recording 42 Trigger ...43 Motion Detection 44 Port ...45 Status ...46 Device Info 46 Help ...47 Installing the DCS-950G Behind a Router 48 D-Link Systems, Inc. 2
D-Link DCS-950G | Product Manual - Page 3
DCS-950G User's Manual Table of Contents Single Camera Installation 48 Multiple Camera Installation 48 1) Identify Your Camera on the Network 49 2) Assign a Local IP Address for Your Camera 49 Assigning and Opening the HTTP Port on the DCS-950G 50 3) Open the HTTP Port 50 Router Setup and
D-Link DCS-950G | Product Manual - Page 4
DCS-950G User's Manual Table of Contents Context Sensitive Menu 78 Uninstall IPView Application 79 Frequently Asked Questions 81 Internet Camera Features 81 Internet Camera Installation 83 How to Ping Your IP Address 85 Time Zone Table 87 Adjusting the Camera Focus 89 Technical Speciﬁ
D-Link DCS-950G | Product Manual - Page 5
DCS-950G User's Manual Package Contents  D-Link SECURICAM Network DCS-950G Internet Camera  Cat5 Ethernet Cable  802.11G Antenna  Power Adapter (5.0V, 2.5A)  Camera Stand with Mounting Bracket and Screws  CD-ROM with Software and Manual  Quick Installation Guide Package Contents Note: Using
D-Link DCS-950G | Product Manual - Page 6
from any PC/Notebook over the Intranet or Internet via a Web browser. The simple installation procedure and intuitive web-based interface offer easy integration with your Ethernet/Fast Ethernet or 802.11g wireless network.The DCS-950G also comes with remote monitoring capability for a complete
D-Link DCS-950G | Product Manual - Page 7
you to view and connect to nearby wireless networks.  Web Conﬁguration: Using a standard Web browser, Administrators can conﬁgure and manage the Internet Camera directly from its own Web page via the Intranet or Internet. This means you can access your DCS-950G at anytime from anywhere in the world
D-Link DCS-950G | Product Manual - Page 8
back to the factory settings.The IP address will also return to the default setting of 192.168.0.20. Hardware Overview 802.11g Antenna The DCS-950G features an 802.11g wireless antenna for 802.11g wireless connectivity to your existing wireless network. The DCS-950G can be used in conjunction with
D-Link DCS-950G | Product Manual - Page 9
DCS-950G User's Manual LEDs Power LED The Power LED is positioned on the right side of the DCS-950G lens. Steady orange conﬁrms that the DCS-950G is powered ON. Hardware Overview Link LED The Link LED is positioned on the right side of the DCS-950G's lens. It is located below the Power LED. Steady
D-Link DCS-950G | Product Manual - Page 10
DCS-950G User's Manual Hardware Installation Hardware Installation Attach the Antenna Locate the antenna included with your DCS-950G and attach it to the antenna connector located on the back of the DCS-950G. Attach the External Power Supply Attach the external power supply to the DC power input
D-Link DCS-950G | Product Manual - Page 11
DCS-950G User's Manual Hardware Installation Attach the Mounting Bracket If you would like to mount the camera on a wall, locate the necessary screws and continue with securing the bracket to the wall. To attach the mounting bracket to the Camera, simply attach the Camera's base to the bracket (
D-Link DCS-950G | Product Manual - Page 12
DCS-950G User's Manual Security Security To ensure the highest security and prevent unauthorized usage of the DCS-950G, the Administrator has the exclusive privilege to authorize all users.The DCS-950G supports multi-level password protection/access that can be restricted by the Administrator for
D-Link DCS-950G | Product Manual - Page 13
DCS-950G User's Manual Using the Setup Wizard Using the Setup Wizard Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DCS-950G CD into your CD-ROM drive. Click Install Software. Click Installation Wizard. D-Link
D-Link DCS-950G | Product Manual - Page 14
DCS-950G User's Manual Click Next. Using the Setup Wizard Click Yes. D-Link Systems, Inc. 14
D-Link DCS-950G | Product Manual - Page 15
DCS-950G User's Manual Click Next. Using the Setup Wizard Click Finish. D-Link Systems, Inc. 15
D-Link DCS-950G | Product Manual - Page 16
DCS-950G User's Manual Using the Setup Wizard Now you should install ffdshow, this will install the proper codec that will allow you to playback recorded video taken by the DCS-950G. Select a language and click OK. Click Next. D-Link Systems, Inc. 16
D-Link DCS-950G | Product Manual - Page 17
DCS-950G User's Manual Click I Agree. Using the Setup Wizard Click Next. D-Link Systems, Inc. 17
D-Link DCS-950G | Product Manual - Page 18
DCS-950G User's Manual Click Install. Using the Setup Wizard Click Next. D-Link Systems, Inc. 18
D-Link DCS-950G | Product Manual - Page 19
DCS-950G User's Manual Click Finish. Using the Setup Wizard Before using ffdshow, you must conﬁgure it's properties. From your computer, please click on Start->Programs->ffdshow->Conﬁguration. D-Link Systems, Inc. 19
D-Link DCS-950G | Product Manual - Page 20
and that Error resilience and Error concealment are set to "none". Click OK and close the window. To run the Setup Wizard, click on Start->Programs->DCS-950 Series Setup Wizard. Your camera's default IP Address will be displayed on the screen. Click Wizard to begin. D-Link Systems, Inc. 20
D-Link DCS-950G | Product Manual - Page 21
DCS-950G User's Manual Using the Setup Wizard By default, the Admin ID and Password are "admin" (lower case). Enter this in both ﬁelds. To change the Admin Password, select the Change box and enter a New Password. Click Next. The IP Address, Subnet Mask of your camera, Gateway, and DNS addresses
D-Link DCS-950G | Product Manual - Page 22
DCS-950G User's Manual Using the Setup Wizard The Connection Mode depends on how your camera is connected to your network. Click Infrastructure for use with a router or Adhoc for a peer-to-peer connection. The Network Name, Wireless Channel, Security Mode, and Authentication type MUST correspond
D-Link DCS-950G | Product Manual - Page 23
DCS-950G User's Manual Using the Setup Wizard If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. This may take a few minutes Your setup is now complete! Wait until the Link LED on the camera begins to ﬂash. Click
D-Link DCS-950G | Product Manual - Page 24
DCS-950G User's Manual Your camera is now displayed in the Web browser. Using the Setup Wizard D-Link Systems, Inc. 24
D-Link DCS-950G | Product Manual - Page 25
page from a Web Browser, enter the IP address that you assigned to your DCS-950G. Home Screen When you click on "Link", the DCS-950G Home screen will appear. Use the following displayed options to set up and view your Internet Camera:  Wizard  Setup  Audio On  Upside Down  Mirrored  Snap
D-Link DCS-950G | Product Manual - Page 26
set up the DCS-950G using the Wizard to walk you through setting up the camera for your network. This will allow you to change the conﬁguration settings of the DCS-950G. This will turn on the built-in microphone on the DCS-950G . By default the audio is turned off. This will ﬂip the image vertically
D-Link DCS-950G | Product Manual - Page 27
DCS-950G User's Manual Logout: Nightshot: Brightness: On-line User Icon: File Path: Start Video Recording: Using the Conﬁguration Menu Click to log out of the DCS-950G. If you would like to view or conﬁgure the camera, you will must log in again. Select this if the camera is operating under low
D-Link DCS-950G | Product Manual - Page 28
for the DCS950G. There will be several options in the Conﬁguration page to choose from to setup your DCS-950G and they are as follows:  Advanced Video User LAN PPPoE DDNS Wireless Site Survey  Tools Admin Time System Firmware Recording Trigger  Status Device Info  Help D-Link Systems, Inc
D-Link DCS-950G | Product Manual - Page 29
DCS-950G User's Manual Using the Conﬁguration Menu Advanced The Advanced tab provides the following conﬁguration options: Video, User, LAN, PPPoE, DDNS, Wireless, and Site Survey. Video Default . By default the quality is set to High. This is the size of the video display. By default the capture
D-Link DCS-950G | Product Manual - Page 30
DCS-950G User's Manual MPEG Sequence Mode: Frame Rate: Bit Rate: Camera Name: Using the Conﬁguration Menu I-frame and P-frame mode and I-frame and BP-frames are selectable. This determines how many repeated P frames will appear after one I frame. A large "Key frame interval" can reduce the bit rate
D-Link DCS-950G | Product Manual - Page 31
). Enter the user's password you want to assign to the speciﬁc Username. The maximum password length is 16 characters (Printable ASCII). The User List displays all the user names that have access to the DCS-950G. To delete a user, click on the corresponding trash can icon. D-Link Systems, Inc. 31
D-Link DCS-950G | Product Manual - Page 32
DCS-950G User's Manual LAN Using the Conﬁguration Menu LAN Settings: Advanced > LAN If you are using a LAN connection, select either Static IP or DHCP Client. If manually assigning a Static IP, enter your IP Address, IP Subnet Mask, Gateway IP Address, and DNS into the ﬁelds provided. D-Link
D-Link DCS-950G | Product Manual - Page 33
DCS-950G User's Manual PPPoE Using the Conﬁguration Menu PPPoE: Advanced > PPPoE If you are using a PPPoE connection, click the Yes button and enter the User Name and Password for your PPPoE account. D-Link Systems, Inc. 33
D-Link DCS-950G | Product Manual - Page 34
DCS-950G User's Manual DDNS Using the Conﬁguration Menu DDNS: Advanced > DDNS Dynamic DNS (Domain Name Service) is a method of keeping a domain name linked to a changing (dynamic) IP address. With most Cable and DSL connections, you are assigned a dynamic IP address and that address is used only
D-Link DCS-950G | Product Manual - Page 35
DCS-950G User's Manual Wireless Using the Conﬁguration Menu Wireless: Connection Mode: SSID: D-Link Systems, Inc. Advanced > Wireless Click to enable or disable your wireless settings. Select one of the two options: Infrastructure - connecting the WLAN using an Access Point such as the DWL-2100AP
D-Link DCS-950G | Product Manual - Page 36
DCS-950G User's Manual Channel: Security Mode: Authentication: Encryption Mode: Key Format: Default Key: Key 1-4: Pre-Shared Key: Using the Conﬁguration Menu The default wireless channel setting is channel 6. Select the channel that is the same as the other wireless devices on your network. Select
D-Link DCS-950G | Product Manual - Page 37
-950G User's Manual Site Survey Using the Conﬁguration Menu Site Survey: Advanced > Site Survey This page will allow you to display all the wireless networks detected by the DCS-950G.You can select a network to connect to and refresh the list of available networks. You must enable your wireless
D-Link DCS-950G | Product Manual - Page 38
DCS-950G User's Manual Using the Configuration Menu Tools The Tools tab provides the following configuration options: Admin, System, Default, Firmware, Recording, Trigger, Motion Detection, and Port. Admin User Name: Password: New Password: Confirm Password: Tools > Admin Enter the administrator
D-Link DCS-950G | Product Manual - Page 39
DCS-950G User's Manual System Using the Conﬁguration Menu Time: Date: Default NTP Server: Synchronize with computer time: Set the Time: Time Zone: Daylight Saving Time: D-Link Systems, Inc. Tools > System The current camera time. The current camera date. Enter the IP address or domain name of the
D-Link DCS-950G | Product Manual - Page 40
DCS-950G User's Manual Default Using the Conﬁguration Menu Restart: Default: Tools > Default Click the Restart button to restart the camera system. Click the Restore button to restore factory default settings.This means that any changes made will be lost and the system will be reset to the
D-Link DCS-950G | Product Manual - Page 41
DCS-950G User's Manual Firmware Using the Configuration Menu Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your
D-Link DCS-950G | Product Manual - Page 42
DCS-950G User's Manual Recording Using the Conﬁguration Menu Upload Image to Network Share Folder: Login Method: User Name: Password: Path: Always: Schedule: Smart Recording: D-Link Systems, Inc. Tools > Recording Clicking on the box will enable uploading of images to your network storage device.
D-Link DCS-950G | Product Manual - Page 43
DCS-950G User's Manual Trigger Using the Conﬁguration Menu SMTP Login Name: SMTP Password: SMTP (Mail) Server: Return E-mail address: Recipient E-mail address: SMTP Port: D-Link Systems, Inc. Tools > Trigger The user name used to log into your e-mail account (e.g. jdoe or [email protected]
D-Link DCS-950G | Product Manual - Page 44
DCS-950G User's Manual Using the Conﬁguration Menu Motion Detection Skip Time: Increasing the before the next recording will start. Motion Detection Motion: Sensitivity: Percentage: Zone 1-3: D-Link Systems, Inc. Tools > Motion Detection Click on the Motion button to enable motion detection
D-Link DCS-950G | Product Manual - Page 45
DCS-950G User's Manual Save: Open MSD: Using the Conﬁguration Menu Saves the related detected alert is triggered. Port Web Port: D-Link Systems, Inc. Tools > Port This is the port that allows the user to connect to the camera's user interface. By default the port is set to 80.You may change
D-Link DCS-950G | Product Manual - Page 46
DCS-950G User's Manual Using the Conﬁguration Menu Note: You MUST also set up your router/gateway for Port Mapping; this will enable remote viewing of your camera via the Internet. Please refer to your router's instruction manual on how to open up ports. For additional help on conﬁguring your
D-Link DCS-950G | Product Manual - Page 47
DCS-950G User's Manual Using the Conﬁguration Menu The Device Info screen lists the following important settings that are currently set for the DCS-950G.  IP Address  IP Subnet Mask  Gateway IP Address  SSID  Wireless IP Address  Channel  PPPoE  Server Name  Firmware Version  On-Line
D-Link DCS-950G | Product Manual - Page 48
DCS-950G User's Manual Installing the DCS-950G Behind a Router Installing the DCS-950G Behind a Router Single Camera Installation If you are installing a single camera on your network the installation is an easy 4-step procedure: 1) Identify Your Camera on the Network 2) Assign a Local IP Address
D-Link DCS-950G | Product Manual - Page 49
-950G User's Manual Installing the DCS-950G Behind a Router 1) Identify Your Camera on the Network Once you are logged into the camera via a Web browser on your network PC, click on the Advanced Tab, and select Video. Enter a unique Camera Name. These settings are important if you are installing
D-Link DCS-950G | Product Manual - Page 50
DCS-950G User's Manual Installing the DCS-950G Behind a Router Assigning and Opening the HTTP Port on the DCS-950G (For Installing Multiple Cameras) Opening ports will allow users to view the camera via the Internet. The ports that are opened must be unique for each camera in order to successfully
D-Link DCS-950G | Product Manual - Page 51
DCS-950G User's Manual Installing the DCS-950G Behind a Router Router Setup and Installation The following steps generally apply to any router that you have on your network. The D-Link DI-624 is used as an example to clarify the conﬁguration process. Your WAN Ip Address information will be listed
D-Link DCS-950G | Product Manual - Page 52
DCS-950G User's Manual Installing the DCS-950G Behind a Router Assigning and Opening Virtual Server Ports 4) Open Virtual Server Ports To Enable Remote Image Viewing The Virtual Server Ports of your router must be opened for remote access to your camera. This is also referred to as port
D-Link DCS-950G | Product Manual - Page 53
DCS-950G User's Manual Installing the DCS-950G Behind a Router Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a standard Web browser. To access from the Internet, simply type in the IP Address of the
D-Link DCS-950G | Product Manual - Page 54
Lite is a complete software management tool for the DCS-950G and includes all conﬁgurable settings available in the Web conﬁguration utility. Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as shown on below. Click Install Software. Click Install IPView Lite. D-Link Systems, Inc
D-Link DCS-950G | Product Manual - Page 55
DCS-950G User's Manual Click Next. Click Yes. IPView Lite Application Installation Click Next. D-Link Systems, Inc. 55
D-Link DCS-950G | Product Manual - Page 56
DCS-950G User's Manual Click Next. IPView Lite Application Installation If your sound card or video card has not passed Windows Logo testing, this window will appear. Click Continue Anyway. If there are previously installed target ﬁles that are newer than the source ﬁles, do NOT overwrite them.
D-Link DCS-950G | Product Manual - Page 57
for the DCS-950G is automatically installed to \Programs\IPViewLite Directory. To start running the IPView Lite click on Windows Start > Programs > IPViewLite > IPViewLite. Enter the default User Name: admin into the respective ﬁeld and click on OK to log into the application. D-Link Systems, Inc
D-Link DCS-950G | Product Manual - Page 58
DCS-950G User's Manual IPView Lite Application Installation Once logged in, the IPView Lite application is executed and the IPView Lite interface will appear in the default List View format: D-Link Systems, Inc. 58
D-Link DCS-950G | Product Manual - Page 59
the application. IPView Lite allows you to manage your cameras by enabling you to search, conﬁgure and preview all the DCS-950Gs from one location. It is designed with a user-friendly interface for ease of control and navigation. How to Change the Password When IPView Lite is used for the ﬁrst time
D-Link DCS-950G | Product Manual - Page 60
DCS-950G User's Manual IPView Lite How to Add a Camera To add a new camera select Camera > Add from the IPView Lite. An Add Camera dialog box will appear. (See below.) Enter the IP Address of the camera in the speciﬁed ﬁeld and click Add. If the IP Address is entered incorrectly or if you have a
D-Link DCS-950G | Product Manual - Page 61
DCS-950G User's Manual IPView Lite Click on Search. IPView Lite will detect and search for all the available cameras that are installed on the local area network. Highlight the camera you wish to add and click on Add. The Add Camera dialog box will appear once again with the IP Address entered.
D-Link DCS-950G | Product Manual - Page 62
DCS-950G User's Manual IPView Lite How to Delete a Camera To delete a camera you must highlight the camera you wish to delete from the IPView Lite list view format. From the menu bar select Camera > Delete. A Delete Camera dialog box will appear. Click Yes to delete the camera, or click No if you
D-Link DCS-950G | Product Manual - Page 63
DCS-950G User's Manual IPView Lite How to Change the IP Address To change an IP Address for a camera, select Camera > Add. An Add Camera dialog box will appear (see below). Click on Browse. The Browse Camera dialog box will appear with a blank screen (see below). Click Search. IPView Lite will
D-Link DCS-950G | Product Manual - Page 64
to enter your admin ID and password before IPView Lite will allow you to change the IP Address for the DCS-950G. Enter the new IP Address, the Subnet Mask, and the Default gateway into the respective ﬁelds and click OK. IPView Lite will apply the new IP Address to the camera. How to Format the
D-Link DCS-950G | Product Manual - Page 65
DCS-950G User's Manual IPView Lite The icon on the upper left corner of the screen will appear with the camera number that is being displayed. To return to the IPView Lite list view , click on Rotate Left in the menu, the video will rotate 90 degrees to the right or left. D-Link Systems, Inc. 65
D-Link DCS-950G | Product Manual - Page 66
DCS-950G User's Manual IPView Lite How to take a Snap-Shot with the Camera To take a snap shot with the camera, you must highlight the camera you wish to use from the IPView Lite list view format. From the menu bar select Camera either 1 or 4 cameras. Click on the 1 or 4 cameras), right-click on
D-Link DCS-950G | Product Manual - Page 67
DCS-950G User's Manual IPView Lite Camera Property Settings Once you have completed the initial configuration of the DCS-950G using the Webbased interface, you can review or change your configuration using either the Web-based configuration utility or the Property Settings in the DCS-950G IPView Lite
D-Link DCS-950G | Product Manual - Page 68
tab provides options for manual recording, schedule recording, or motion trigger recording. Manual Recording If the Manual Recording option is chosen, you must manually start recording in the List view of the DCS-950G in the Menu Bar or by clicking on the Record Icon. D-Link Systems, Inc. 68
D-Link DCS-950G | Product Manual - Page 69
DCS-950G User's Manual IPView Lite Scheduled Recording Select Schedule Recording to record based on speciﬁc times and dates. Click Schedule Setting to set the time and date for recording your ﬁles. Select By Date and enter in the dates, Start, and Stop Times. The camera will start to record
D-Link DCS-950G | Product Manual - Page 70
DCS-950G User's Manual IPView Lite Motion Trigger Recording Checking Motion Trigger Recording enables the DCS-950G to record based on motion. When this option is selected and the camera detects motion within the range of the viewing window, recording will be triggered. Recording will continue
D-Link DCS-950G | Product Manual - Page 71
DCS-950G User's Manual IPView Lite Menu Bar The menu bar makes it easier to navigate IPView Lite. All Management functions can be accessed from the menu bar. File New : Open: Save/Save As: Exit: D-Link Systems, Inc. Opens a new camera list. Cameras must then be added to the list for conﬁguration
D-Link DCS-950G | Product Manual - Page 72
DCS-950G User's Manual IPView Lite View View on the menu bar provides users with management capabilities for Columns, List, Camera and Refresh. You can view the Camera in 1 Camera or 4 Camera mode. The View menu bar is pictured below. Columns When Columns is launched, a dialog box will appear
D-Link DCS-950G | Product Manual - Page 73
DCS-950G User's Manual IPView Lite List View You can view the format in List view. The List viewing format allows easy management and control of each camera. All the cameras and their properties, such as the camera name, IP Address, user name, and location, will be displayed in the list view.
D-Link DCS-950G | Product Manual - Page 74
DCS-950G User's Manual IPView Lite Camera Camera on the menu bar provides options to manage the camera. Add up to 4 additional Cameras for viewing. The Camera menu also allows you to Delete a camera, manage the Property, Enable real-time video capture, or take a Snap shot image. Enable Function
D-Link DCS-950G | Product Manual - Page 75
DCS-950G User's Manual IPView Lite Account The account menu is for administrators to change user name and password. System Conﬁguration . This menu allows you to set overwrite options recommended that you select this option to save your camera settings in IPView Lite. D-Link Systems, Inc. 75
D-Link DCS-950G | Product Manual - Page 76
DCS-950G User's Manual IPView Lite In order to allow old video ﬁles to be overwritten and replaced by new recorded ﬁles, place a the Recording File Path Settings in the Recording menu. About Under About on the menu bar, click About for camera details such as software D-Link Systems, Inc. 76
D-Link DCS-950G | Product Manual - Page 77
DCS-950G User's Manual IPView Lite IPView Lite Icon Description Open a new file. The hot key is Ctrl+N. Open an existing file. The hot key is Ctrl+O. Save a file. The hot key is Ctrl+S. List view format. The hot key is Ctrl+F1. 1 Camera view format. The hot key is Ctrl+F3. 4 Camera view format. The
D-Link DCS-950G | Product Manual - Page 78
DCS-950G User's Manual IPView Lite Context Sensitive Menu In List View format, highlight a camera and right-click to bring up a context sensitive menu for : Enable, Rotate Right, Rotate Left, Snap Shot, Start, List, 1 Camera or 4 Cameras, Previous Page and Next Page. D-Link Systems, Inc. 78
D-Link DCS-950G | Product Manual - Page 79
DCS-950G User's Manual Uninstall IPView Application Uninstall IPView Application Click on windows Start Menu > Programs > IPView > Uninstall IPView. A new prompt screen After you click on Next, a Conﬁrm Uninstall dialog box will appear. Click OK to continue the process. D-Link Systems, Inc. 79
D-Link DCS-950G | Product Manual - Page 80
DCS-950G User's Manual Uninstall IPView Application The InstallShield Wizard prompt will appear. Click Finish to complete the uninstallation procedure. D-Link Systems, Inc. 80
D-Link DCS-950G | Product Manual - Page 81
DCS-950G User's Manual Frequently Asked Questions Frequently Asked Questions Internet Camera Features 1 What is an Internet Camera? The Internet Camera is a standalone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE
D-Link DCS-950G | Product Manual - Page 82
disconnect the Internet Camera from the network. Then run the PING utility (follow the instructions in the section titled "PING Your IP Address:). If there is a reply, it indicates that there is another device on the network with the same IP address.You will need to run the Install Wizard again and
D-Link DCS-950G | Product Manual - Page 83
the provided power supply, which is DC 5V, for the Internet Camera and verify that the power supply is well connected. 12 Why does the LAN LED not light up properly? There might be a problem with the network cable.To conﬁrm that the cables are working, PING the address of a known device on the
D-Link DCS-950G | Product Manual - Page 84
settings on your browser to allow the ActiveX plug-in to be installed. If you are using Internet Explorer with a version number of lower than 5, then you will need to upgrade your Web browser software in order to view the streaming video transmitted by the Internet Camera. D-Link Systems, Inc. 84
D-Link DCS-950G | Product Manual - Page 85
DCS-950G User's Manual How to Ping Your IP Address How to Ping Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP Address is accessible by sending a packet to the specific address and waiting for a reply. It is a very useful tool to confirm if the IP
D-Link DCS-950G | Product Manual - Page 86
DCS-950G User's Manual How to Ping Your IP Address If you fail to connect to your camera you will see the following: Check to see if you have entered your camera's IP Address correctly or reassign your camera's IP Address. D-Link Systems, Inc. 86
D-Link DCS-950G | Product Manual - Page 87
DCS-950G User's Manual Time Zone Table Time Zone Table GMT stands for Greenwich Mean Time, which is the global time that all time zones are measured from. D-Link Systems, Inc. 87
D-Link DCS-950G | Product Manual - Page 88
DCS-950G User's Manual Time Zone Table D-Link Systems, Inc. 88
D-Link DCS-950G | Product Manual - Page 89
image quality, keep in mind that while adjusting the DCS-950G focus you can preview the image quality from your Web browser. Camera Lens Adjust by turning clockwise or counter-clockwise. Note: You can further adjust the Internet Camera's image quality through the Web Conﬁguration under Advanced
D-Link DCS-950G | Product Manual - Page 90
DCS-950G User's Manual Technical Specifications Technical Specifications Video specification Resolution: Sensor: Gain control: Exposure: White /X Power LED (Orange) LAN Activity LED (Green) Power Supply: Power Communication: DC 5V/2.5A, switching type 4.5 Watt (900mA x 5V) D-Link Systems, Inc. 90
D-Link DCS-950G | Product Manual - Page 91
DCS-950G User's Manual Technical Speciﬁcations Communication Support Communication: Communication protocol: 10/100Mbps Ethernet and Fast Ethernet only 2.4 802.11G Wireless 54Mbps* HTTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE Web Conﬁguration Requirements:  Internet Explorer 6.0 or
D-Link DCS-950G | Product Manual - Page 92
DCS-950G User's Manual Contacting Technical Support Contacting Technical Support You can ﬁnd software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on
D-Link DCS-950G | Product Manual - Page 93
DCS-950G User's Manual Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. ("D-Link") provides this Limited Warranty: · Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and · Only for
D-Link DCS-950G | Product Manual - Page 94
DCS-950G User's Manual Warranty Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Link's products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or
D-Link DCS-950G | Product Manual - Page 95
DCS-950G User's Manual Warranty Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED
D-Link DCS-950G | Product Manual - Page 96
DCS-950G User's Manual Warranty FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation
D-Link DCS-950G | Product Manual - Page 97
DCS-950G User's Manual Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 05/13/05 D-Link Systems, Inc. 97

Match case Limit results 1 per page