D-Link DCS-950G Product Manual - Page 52

Assigning and Opening Virtual Server Ports - av control port

Get D-Link DCS-950G - Network Camera PDF manuals and user guides
UPC - 790069270703
View all D-Link DCS-950G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

DCS-950G User's Manual Installing the DCS-950G Behind a Router Assigning and Opening Virtual Server Ports 4) Open Virtual Server Ports To Enable Remote Image Viewing The Virtual Server Ports of your router must be opened for remote access to your camera. This is also referred to as port forwarding. Please proceed as follows: •Select Enabled to enable virtual server settings. •Select a camera name. •Enter your camera's Local IP Address in the Private IP field. •Select TCP under Protocol Type. •If you are using the default camera port settings, enter 80 in to the Public and Private Port section. •Schedule should be set to Always so that the camera images can be accessed at any time. •In the Virtual Servers List, a check mark appearing before the camera name will indicate that the ports are enabled. •Click Apply to save your settings. Note: If you are installing multiple cameras, be sure to open ONE Web port per additional camera installed: port 81, 82, etc. for Web server.The AV Control Port and AV Streaming Port also need to be opened. These ports are 5000 and 5001. Each camera will also require different Control and Streaming ports (5002, 5003,...etc.) D-Link Systems, Inc. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
52
DCS-950G User’s Manual
D-Link Systems, Inc.
Installing the DCS-950G Behind a Router
Assigning and Opening Virtual Server Ports
4) Open Virtual Server Ports To Enable Remote Image Viewing
The Virtual Server Ports of your router must be opened for remote access to your
camera. This is also referred to as port forwarding. Please proceed as follows:
•
Select
Enabled
to enable virtual server settings.
•
Select a camera name.
•
Enter your camera’s Local IP Address in the
Private IP
field.
•
Select
TCP
under
Protocol Type
.
•
If you are using the default camera port settings, enter 80 in to the
Public
and
Private
Port section.
•
Schedule
should be set to
Always
so that the camera images can be
accessed
at any time.
•
In the
Virtual Servers List
, a check mark appearing before the camera name will
indicate that the ports are enabled.
•
Click
Apply
to save your settings. Note: If you are installing multiple cameras, be
sure to open ONE Web port per additional camera installed: port 81, 82, etc. for
Web server. The AV Control Port and AV Streaming Port also need to be opened.
These ports are 5000 and 5001. Each camera will also require different Control
and Streaming ports (5002, 5003,...etc.)