D-Link DES-3526 Reference Manual - Page 200
show authen application, create authen server_host, Login Method List
UPC - 790069265969
View all D-Link DES-3526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
DES-3526 Layer 2 Fast Ethernet Switch DES-3526:4# show authen application Purpose Used to display authentication methods for the various applications on the Switch. Syntax show authen application Description This command will display all of the authentication method lists (login, enable administrator privileges) for Switch configuration applications (console, telnet, ssh, web) currently configured on the Switch. Parameters None. Restrictions None. Example usage: To display the login and enable method list for all applications on the Switch: DES-3526:4#show authen application Command: show authen application Application Login Method List Enable Method List Console default default Telnet Trinity default SSH default default HTTP default default DES-3526:4# create authen server_host Purpose Used to create an authentication server host. Syntax create authen server_host protocol [tacacs | xtacacs | tacacs+ | radius] {port | key [ | none] | timeout | retransmit < 1-255>} Description This command will create an authentication server host for the TACACS/XTACACS/TACACS+/RADIUS security protocols on the Switch. When a user attempts to access the Switch with authentication protocol enabled, the Switch will send authentication packets to a remote TACACS/XTACACS/TACACS+/RADIUS server host on a remote host. The TACACS/XTACACS/TACACS+/RADIUS server host will then verify or deny the request and return the appropriate message to the Switch. More than one authentication protocol can be run on the same physical server host but, remember that TACACS/XTACACS/TACACS+/RADIUS are separate entities and are not compatible with each other. The maximum supported number of server hosts is 16. 192