D-Link DES-3526 Reference Manual - Page 27
enable telnet, DES-3526:4#enable telnet 23
UPC - 790069265969
View all D-Link DES-3526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DES-3526 Layer 2 Fast Ethernet Switch To disable pausing of the screen display when show command output reaches the end of the page: DES-3526:4#disable clipaging Command: disable clipaging Success. DES-3526:4# enable telnet Purpose Used to enable communication with and management of the Switch using the Telnet protocol. Syntax enable telnet Description This command is used to enable the Telnet protocol on the Switch. The user can specify the TCP or UDP port number the Switch will use to listen for Telnet requests. Parameters − The TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet protocol is 23. Restrictions Only administrator-level users can issue this command. Example usage: To enable Telnet and configure port number: DES-3526:4#enable telnet 23 Command: enable telnet 23 Success. DES-3526:4# disable telnet Purpose Used to disable the Telnet protocol on the Switch. Syntax disable telnet Description This command is used to disable the Telnet protocol on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To disable the Telnet protocol on the Switch: 19