D-Link DES-3526 Reference Manual - Page 30
reset, login, DES-3526:4#reset config - reset password
UPC - 790069265969
View all D-Link DES-3526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DES-3526 Layer 2 Fast Ethernet Switch DES-3526:4#reboot Command: reboot Are you sure want to proceed with the system reboot? (y|n) Please wait, the switch is rebooting... reset Purpose Used to reset the Switch to the factory default settings. Syntax Description reset {[config | system]} This command is used to restore the Switch's configuration to the default settings assigned from the factory. Parameters config − If the keyword 'config' is specified, all of the factory default settings are restored on the Switch including the IP address, user accounts, and the switch history log. The Switch will not save or reboot. system − If the keyword 'system' is specified all of the factory default settings are restored on the Switch. The Switch will save and reboot after the settings are changed to default. Rebooting will clear all entries in the Forwarding Data Base. If no parameter is specified, the Switch's current IP address, user accounts, and the switch history log are not changed. All other parameters are restored to the factory default settings. The Switch will not save or reboot. Restrictions Only administrator-level users can issue this command. Example usage: To restore all of the Switch's parameters to their default values: DES-3526:4#reset config Command: reset config Are you sure to proceed with system reset?(y/n) Success. DES-3526:4# login Purpose Syntax Description Parameters Restrictions Used to log in a user to the Switch's console. login This command is used to initiate the login procedure. The user will be prompted for a Username and Password. None. None. 22