D-Link DES-3526 Reference Manual - Page 66
Network Monitoring Commands, show packet ports
UPC - 790069265969
View all D-Link DES-3526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
DES-3526 Layer 2 Fast Ethernet Switch 9 NETWORK MONITORING COMMANDS The network monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show packet ports show error ports show utilitzation clear counters clear log show log enable syslog disable syslog show syslog create syslog host config syslog host delete syslog host show syslog host Parameters [cpu | ports {}] ports index ipaddress {severity [informational | warning | all] | facility[local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | state [enable | disable] [all | ] {severity [informational | warning | all] |facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port | ipaddress | state [enable | disable]} [ | all] Each command is listed, in detail, in the following sections. show packet ports Purpose Used to display statistics about the packets sent and received by the Switch. Syntax show packet ports Description This command is used to display statistics about packets sent and received by ports specified in the . Parameters − Specifies a port or range of ports to be displayed. Restrictions None. Example usage: To display the packets analysis for port 7 of module 2: DES-3526:4#show packet port 2 58