D-Link DFL-260-IPS-12 Product Manual - Page 203
Example 4.16., Configuration - Group Translation
View all D-Link DFL-260-IPS-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
4.6.3. IGMP Configuration • Destination Network: auto • Multicast Source: 192.168.10.1 • Multicast Group: 239.192.10.0/24 4. Click OK Chapter 4. Routing Example 4.16. if2 Configuration - Group Translation The following steps needs to be executed to create the report and query rule pair for if2 which translates the multicast group. Note that the group translated therefore the IGMP reports include the translated IP addresses and the queries will contain the original IP addresses Web Interface A. Create the first IGMP Rule: 1. Go to Routing > IGMP > IGMP Rules > Add > IGMP Rule 2. Under General enter: • Name: A suitable name for the rule, for example Reports_if2 • Type: Report • Action: Proxy • Output: wan (this is the relay interface) 3. Under Address Filter enter: • Source Interface: if2 • Source Network: if2net • Destination Interface: core • Destination Network: auto • Multicast Source: 192.168.10.1 • Multicast Group: 239.192.10.0/24 4. Click OK B. Create the second IGMP Rule: 1. Again go to Routing > IGMP > IGMP Rules > Add > IGMP Rule 2. Under General enter: • Name: A suitable name for the rule, for example Queries_if2 • Type: Query • Action: Proxy • Output: if2 (this is the relay interface) 3. Under Address Filter enter: • Source Interface: wan • Source Network: UpstreamRouterIp • Destination Interface: core • Destination Network: auto 203