D-Link DFL-260-IPS-12 Product Manual - Page 64
Logout at shutdown, Maximum Radius Contexts, 3.10. RADIUS Advanced Settings
View all D-Link DFL-260-IPS-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
2.3.10. RADIUS Advanced Settings Chapter 2. Management and Maintenance continue to be logged in. Disabling the setting will mean that the user will be logged out if the RADIUS accounting server cannot be reached even though the user has been previously authenticated. Default: Enabled Logout at shutdown If there is an orderly shutdown of the NetDefend Firewall by the administrator, then NetDefendOS will delay the shutdown until it has sent RADIUS accounting STOP messages to any configured RADIUS server. If this option is not enabled, NetDefendOS will shutdown even though there may be RADIUS accounting sessions that have not been correctly terminated. This could lead to the situation that the RADIUS server will assume users are still logged in even though their sessions have been terminated. Default: Enabled Maximum Radius Contexts The maximum number of contexts allowed with RADIUS. This applies to RADIUS use with both accounting and authentication. Default: 1024 Example 2.13. RADIUS Accounting Server Setup This example shows configuring of a local RADIUS server known as radius-accounting with IP address 123.04.03.01 using port 1813. Web Interface 1. Go to User Authentication > Accounting Servers > Add > Radius Server 2. Now enter: • Name: radius-accounting • IP Address: 123.04.03.01 • Port: 1813 • Retry Timeout: 2 • Shared Secret:enter a password • Confirm Secret:re-enter the password • Routing Table: main 3. Click OK 64