D-Link DFL-260-IPS-12 Product Manual - Page 372
Example 8.3. Configuring a RADIUS Server
View all D-Link DFL-260-IPS-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
8.2.8. HTTP Authentication Chapter 8. User Authentication • Destination Network lan_ip 3. Click OK B. Set up the Authentication Rule 1. Go to User Authentication > User Authentication Rules > Add > User Authentication Rule 2. Now enter: • Name: HTTPLogin • Agent: HTTP • Authentication Source: Local • Interface: lan • Originator IP: lannet 3. For Local User DB choose lannet_auth_users 4. For Login Type choose HTMLForm 5. Click OK C. Set up an IP rule to allow authenticated users to browse the Web. 1. Go to Rules > IP Rules > Add> IP rule 2. Now enter: • Name: Allow_http_auth • Action: NAT • Service: HTTP • Source Interface: lan • Source Network: lannet_users • Destination Interface any • Destination Network all-nets 3. Click OK Example 8.3. Configuring a RADIUS Server The following steps illustrate how a RADIUS server is typically configured. Web Interface 1. User Authentication > External User Databases> Add > External User Database 2. Now enter: a. Name: Enter a name for the server, for example ex-users b. Type: Select RADIUS c. IP Address: Enter the IP address of the server, or enter the symbolic name if the server has been defined in the Address Book d. Port: 1812 (RADIUS service uses UDP port 1812 by default) e. Retry Timeout: 2 (NetDefendOS will resend the authentication request to the sever if there is no response after the timeout, for example every 2 seconds. This will be retried a maximum of 3 times) 372