D-Link DFL-260-IPS-12 Product Manual - Page 430
L2TP/PPTP Server advanced settings, L2TP Before Rules
View all D-Link DFL-260-IPS-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 430 highlights
9.5.3. L2TP/PPTP Server advanced settings First, change the current category to be the main IP rule set: gw-world:/> cc IPRuleSet main Now, add the IP rules: gw-world:/main> add IPRule action=Allow Service=all_services SourceInterface=l2tp_tunnel SourceNetwork=l2tp_pool DestinationInterface=any DestinationNetwork=all-nets name=AllowL2TP gw-world:/main> add IPRule action=NAT Service=all_services SourceInterface=l2tp_tunnel SourceNetwork=l2tp_pool DestinationInterface=any DestinationNetwork=all-nets name=NATL2TP Web Interface 1. Go to Rules > IP Rules > Add > IPRule 2. Enter a name for the rule, for example AllowL2TP 3. Now enter: • Action: Allow • Service: all_services • Source Interface: l2tp_tunnel • Source Network: l2tp_pool • Destination Interface: any • Destination Network: all-nets 4. Click OK 5. Go to Rules > IP Rules > Add > IPRule 6. Enter a name for the rule, for example NATL2TP 7. Now enter: • Action: NAT • Service: all_services • Source Interface: l2tp_tunnel • Source Network: l2tp_pool • Destination Interface: any • Destination Network: all-nets 8. Click OK Chapter 9. VPN 9.5.3. L2TP/PPTP Server advanced settings The following L2TP/PPTP server advanced settings are available to the administrator: L2TP Before Rules 430