D-Link DFL-80 User Manual - Page 72
Adding an Incoming Policy
View all D-Link DFL-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Adding an Incoming Policy: Step 1: Under Incoming of the Policy menu, click the New Entry button. Step 2: Source Address: Select names of the external networks from the drop down list. The drop down list contains the names of all external networks defined in the External section of the Address menu. To create a new source address, please go to the Internal section under the Address menu. Destination Address: Select names of the internal networks from the drop down list. The drop down list contains the names of IP mapping addresses specified in the Mapped IP or the Virtual Server sections of Virtual Server menu. To create a new destination address, please go to the Virtual Server menu. (Please refer to Chapter 8 for Virtual Server for details) Service: Specified services provided by internal network servers. These are services/application that are allowed to pass from the External network to the Internal network. Choose ANY for all services. Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling between the specified external network and Virtual Server/ Mapped IP. Logging: Select "Enable" to enable flow monitoring. Statistics: Select "Enable" to enable flow statistics. Alarm Threshold: Set a maximum flow rate (in Kbytes/Sec). An alert will be sent if flow rates are higher than the specified value. Step 3: Click OK to add new policy or click Cancel to cancel adding new incoming policy. 72