D-Link DFL-80 User Manual - Page 91
Adding a PPTP Client
View all D-Link DFL-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Adding a PPTP Client Step 1. Select VPN > PPTP Client. ! User name: Specify the PPTP client. This should be unique. ! Password: Specify the PPTP client password. ! Server Address: Enter the PPTP Server's IP address. ! Remote Server: Single Machine: Check to connect to single computer. Multi-Machine: Check to allow multiple computers connected to the PPTP server. IP Address: Enter the PPTP Client IP address. Netmask: Enter the PPTP Client Sub net mask. ! Auto-Connect when sending packet through the link: Check to enable the auto-connection whenever there's packet to transmit over the connection. ! Auto-Disconnect if idle ... minutes: Configure this device to disconnect to the PPTP Server when there is no activity for a predetermined period of time. To keep the line always connected, set the number to 0. ! Schedule: Click the down arrow to select the schedule, which was pre-determined in Schedule. Refer to the corresponding section for details. Click OK to save modifications or click Cancel to cancel modifications. 91