D-Link DFL-80 User Manual - Page 86
Modifying PPTP Server Design
View all D-Link DFL-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Modifying PPTP Server Design Step 1. Select VPN > PPTP Server. Step 2. Click Modify after the Client IP Range. Step 3. In the Modify Server Design Window, enter appropriate settings. ! Disable PPTP- Check to disable PPTP Server. ! Enable PPTP- Check to enable PPTP Server. 1. Encyption: the default is set to disabled. 2. Client IP Range Enter the IP range allocated for PPTP Client to connect to the PPTP server. ! Auto-Disconnect if idle ... minutes- Configure this device to disconnect to the PPTP Server when there is no activity for a predetermined period of time. To keep the line always connected, set the number to 0. ! Schedule- Click the down arrow to select the schedule, which was pre-determined in Schedule. Refer to the corresponding section for details. Step 4. Click OK to save modifications or click Cancel to cancel modifications 86