D-Link DFL-800-AV-12 User Manual - Page 123
Transparent Mode Scenarios, Switch Route - 123
View all D-Link DFL-800-AV-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
4.6.6. Transparent Mode Scenarios Chapter 4. Routing Switch Route: Similar as shown in the previous example. Set up the switch route with the new interface group created earlier. Configure the rules: 1. Go to Rules > New Rule 2. The Rule Properties dialog will be displayed 3. Specify a suitable name for the rule, for instance HTTP-LAN-to-DMZ 4. Enter following: • Action: Allow • Source Interface: lan • Destination Interface: dmz • Source Network: all-nets • Destination Network: 10.1.4.10 5. Under the Service tab, choose http in the Pre-defined control 6. Click OK 7. Go to Rules > New Rule 8. The Rule Properties dialog will be displayed 9. Specify a suitable name for the rule, for instance HTTP-WAN-to-DMZ 10. Enter following: • Action: SAT • Source Interface: wan • Destination Interface: dmz • Source Network: all-nets • Destination Network: wan_ip 11. Under the Service tab, choose http in the Pre-defined control 12. Under the Address Translation tab, choose Destination IP Address and enter 10.1.4.10 in the New IP Address control. 13. Click OK 14. Go to Rules > New Rule 15. The Rule Properties dialog will be displayed 16. Specify a suitable name for the rule, for instance HTTP-LAN-to-DMZ 17. Enter following: • Action: Allow • Source Interface: wan • Destination Interface: dmz • Source Network: all-nets • Destination Network: wan_ip 18. Under the Service tab, choose http in the Pre-defined control 19. Click OK Web Interface Configure the interfaces: 123