D-Link DFL-CPG310 Product Manual - Page 187

Manually Configuring a WLAN In this field... Do this... Require WPA2 (802.11i) WEP Keys Specify whether you want to require wireless stations to connect using WPA2, by selecting one of the following: • Enable. Only wireless stations using WPA2 can access the WLAN network. • Disable. Wireless stations using either WPA or WPA2 can access the WLAN network. This is the default. If you selected WEP encryption, you must configure at least one WEP key. The wireless stations must be configured with the same key, as well. Key 1, 2, 3, 4 radio Click the radio button next to the WEP key that this gateway should use for button transmission. The selected key must be entered in the same key slot (1-4) on the station devices, but the key need not be selected as the transmit key on the stations. Note: You can use all four keys to receive data. Key 1, 2, 3, 4 length Select the WEP key length from the drop-down list. The possible key lengths are: • 64 Bits. The key length is 10 characters. • 128 Bits. The key length is 26 characters. • 152 Bits. The key length is 32 characters. Note: Some wireless card vendors call these lengths 40/104/128, respectively. Note: WEP is generally considered to be insecure, regardless of the selected key length. Chapter 7: Configuring a Wireless Network 171