D-Link DFL-CPG310 Product Manual - Page 52
Setting Up the NetDefend firewall, Setting up Network Printers - d link setup
UPC - 790069289309
View all D-Link DFL-CPG310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting Up the NetDefend firewall 6. In wireless models, prepare the NetDefend firewall for a wireless connection: a. Connect the antennas that came with your NetDefend firewall to the ANT1 and ANT2 antenna connectors in the appliance's rear panel. b. Bend the antennas at the hinges, so that they point upwards. 7. In models with a print server, you can connect network printers as follows: a. Connect one end of a USB cable to a USB port at the back of the unit. If needed, you can use the provided USB extension cord. b. Connect the other end to a printer or a USB 2.0 hub. Warning: Verify that the USB devices' power requirement does not exceed the appliance's USB power supply capabilities. Failure to observe this warning may cause damage to the appliance and void the warranty. For information on setting up network printers, see Setting up Network Printers on page 424. Setting Up the NetDefend firewall After you have installed the NetDefend firewall, you must set it up using the steps shown below. When setting up your NetDefend firewall for the first time after installation, these steps follow each other automatically. After you have logged on and set up your password, the Setup Wizard automatically opens and displays the dialog boxes for configuring your Internet connection. After you have configured your Internet connection, the Setup Wizard automatically displays the dialog boxes for registering your NetDefend firewall. If desired, you can exit the Setup Wizard and perform each of these steps separately. 36 D-Link NetDefend firewall User Guide