D-Link DG-104S Product Manual - Page 23
Configuring the SNMP, Subnet mask, IP address, Default gateway - reset
View all D-Link DG-104S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using the Boot Menu Configuring the IP IP address: Enter an IP address for the VoIP gateway. Subnet mask: Enter a subnet mask for the VoIP gateway. Default gateway: Enter the IP address of the WAN device (usually a router) you are using to make the WAN connection. After you have finished, press to save changes to RAM. Next, press the key to return to the Boot Menu. Position the cursor over the Save Changes item and press . This will save the settings to NV-RAM so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear panel of the device is in the down position. Position the cursor over the Restart System item and press for the changes to take effect. Your VoIP is now configured for use. Configuring the SNMP This screen allows you to set an SNMP trap manager. Boot Menu-SNMP Configuration screen 23