D-Link DG-104S Product Manual - Page 26
Update Boot and Application Files, Software Update Mode, TFTP Server Address, Firmware Update
View all D-Link DG-104S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Using the Boot Menu Update Boot and Application Files Boot Menu-Update Boot and Application Files screen After making your changes in the fields above, press RESET DEVICE TO START UPDATE to initiate the update sequence. Each item on the Update Boot and Application Files screen is described below: Software Update Mode: This specifies downloading the image file through a WAN Link. TFTP Server Address: The IP address of the TFTP server where the runtime or configuration file is located. This entry is used only if the Firmware Update is set to Enable. Firmware Update: Determines whether or not the device will try to look for a runtime image file on the TFTP server. File Name: The complete path and filename of the runtime image file on your TFTP server to be uploaded to the device. Use Config File: Toggle to Enabled to use the settings in a configuration text file when the device is reset (rebooted). 26