D-Link DNR-312L User Manual - Page 28
D-Link NVR Search Utility - Mac - network video recorder d link
View all D-Link DNR-312L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Section 3 - Configuration Interface D-Link NVR Search Utility - Mac Mac Users - Insert the included CD, go to the CD directory, then enter the Mac Utility folder. Click the NVR Search Utility file to run this setup tool. When first powered on, during the initial boot sequence, the NVR will wait to be assigned an IP address via DHCP. If it does not receive a DHCP-assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the IP address before logging in or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on the CD to locate the device on your network and make any necessary changes. Network Video D-Link's NVR Search Utility will display information for all NVR devices Recorder: it detects on your network. Refresh: Click to refresh the device list. Configuration: Click Configuration to access the Web-based configuration interface for the NVR LAN: Configure the LAN Settings for the NVR. Receive DHCP: Select Enable to use DHCP for your LAN IP settings, or Disable to use Static IP. Apply: Click Apply to save and activate the changes to the LAN Settings. About: Click About to view the software version of the NVR Search Utility. Exit: Click Exit to close the utility. D-Link DNR-312L User Manual 24