D-Link DNS-726-4 Product Manual

D-Link DNS-726-4 - Network Video Recorder Standalone DVR Manual

Get D-Link DNS-726-4 - Network Video Recorder Standalone DVR PDF manuals and user guides
UPC - 790069320200
View all D-Link DNS-726-4 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DNS-726-4 manual content summary:

  • D-Link DNS-726-4 | Product Manual - Page 1
  • D-Link DNS-726-4 | Product Manual - Page 2
    person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date November 21, 2008 Description DNS-722-4/DNS-726-4 revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or
  • D-Link DNS-726-4 | Product Manual - Page 3
    (DNS-726-4 Only 37 E-mail Setup 38 Dynamic DNS 39 Time and Date Setup 40 Maintenance 41 User Management 41 RAID 43 Backup and Restore 45 Firmware Update 46 Status 47 Camera Status 47 Device Info 48 System Log 49 NVR Log 50 Help 51 Live Video 52 D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 4
    72 Set Connections to the Units 73 Backup and File Manager Application 74 Troubleshooting 76 Choose a RAID Level 79 Replacing or Adding a New Hard Drive 80 Technical Specifications 81 Firmware Specification 81 Hardware Specification 82 Warranty 84 Registration 89 D-Link DNS-722-4/DNS-726
  • D-Link DNS-726-4 | Product Manual - Page 5
    Section 1 - Product Overview Product Overview Package Contents  D-Link DNS-722-4/ DNS-726-4 Network Video Recorder (NVR)  CAT5 Ethernet Cable  Power Adapter  Cable Holder  Keys  Manual and Software on CD  Quick Install Guide Note: Using a power supply with a different voltage than the one
  • D-Link DNS-726-4 | Product Manual - Page 6
    drive(s)* Network Requirements • Broadband Internet connection (for remote access) • IP Camera(s) (refer to the D-Link website for a list of supported cameras) • Gigabit Ethernet switch or , identical drives are recommended for RAID 1 configurations. D-Link DNS-722-4/DNS-726-4 User Manual 
  • D-Link DNS-726-4 | Product Manual - Page 7
    from local and remote network cameras without the need for a dedicated PC. DNS-722-4 supports D-Link network cameras only. DNS-726-4 supports D-Link, Sony, Panasonic, and Axis network cameras. The bundled 16-channel (DNS-726-4 only) recording software can connect to multiple NVRs and manage them as
  • D-Link DNS-726-4 | Product Manual - Page 8
    Network Functionality • PPPoE Support: The D-Link NVR utilizes ADSL services. It can connect to the Internet via an ADSL modem over Ethernet. • DDNS Support: Dynamic DNS is a solution for users without a fixed IP address. With DDNS service, users can connect to the NVR from the Internet using
  • D-Link DNS-726-4 | Product Manual - Page 9
    to notify the NVR to perform a proper shutdown before battery power runs out. 7. Backup Recording Data: Recorded data is stored in a secure database. This recorded data can be backed up to additional storage locations periodically or whenever needed. D-Link DNS-722-4/DNS-726-4 User Manual 
  • D-Link DNS-726-4 | Product Manual - Page 10
    controls the digital output, E-mail and recording of all the connected cameras. For example, if camera 1 detects motion, the NVR can trigger camera 2 to record, camera 3 to output a light and camera 4 to turn to the preset position. (DNS-726-4 only) 3. Event Log: With the simple event log, the log
  • D-Link DNS-726-4 | Product Manual - Page 11
    one frame at a time. 6. Video Enhancement: Users can enhance the recorded video with controls such as brightness, contrast, and sharpness. 7. Print Picture: If a printer is connected to the user's PC, the NVR can also print the selected still image. D-Link DNS-722-4/DNS-726-4 User Manual 
  • D-Link DNS-726-4 | Product Manual - Page 12
    until the LED begins to blink to power down the NVR. Drive LEDs: These LEDs will be solid BLUE when the drives are connected but inactive. The LEDs will blink when the drives BLUE when there is an Ethernet connection. It will blink to indicate LAN traffic. D-Link DNS-722-4/DNS-726-4 User Manual 
  • D-Link DNS-726-4 | Product Manual - Page 13
    Section 1 - Product Overview Bottom View Key lock Key lock: Use this lock to secure the front panel of the NVR. The panel can be unlocked with the provided key for initial installation. D-Link DNS-722-4/DNS-726-4 User Manual 
  • D-Link DNS-726-4 | Product Manual - Page 14
    socket is used to reset the system or restore the factory default settings. To reset, simply press and hold the button until the power LED flashes. D-Link DNS-722-4/DNS-726-4 User Manual Gigabit Ethernet Port USB Connector: A UPS can be used as an emergency power supply for the NVR. The UPS can use
  • D-Link DNS-726-4 | Product Manual - Page 15
    New Hard Disk Drive Install the Hard Drives: 1. Please install at least one 3.5" SATA hard drive before turning on the NVR. Use the key to unlock the faceplate from the bottom of the NVR. 2. Slide the faceplate up until it unlatches from the device. D-Link DNS-722-4/DNS-726-4 User Manual 11
  • D-Link DNS-726-4 | Product Manual - Page 16
    inside the drive bay of the NVR. Gently push the drive in until it connects. When a drive is inserted properly, you will feel it "seat" into the connector. Some hard drives that are thin or oddly shaped may need to be guided Link DNS-722-4/DNS-726-4 User Manual 12
  • D-Link DNS-726-4 | Product Manual - Page 17
    Section 2 - Installation 5. Attach the faceplate to the front of the device. 6. Lock the faceplate to secure the Hard Disks. D-Link DNS-722-4/DNS-726-4 User Manual 13
  • D-Link DNS-726-4 | Product Manual - Page 18
    The power LED will blink and the NVR will turn off after a moment. Attach the External Power Supply Attach the external power supply to the DC power receptacle located on the NVR's rear panel (labeled DC12V) and connect the other end to an AC power outlet. D-Link DNS-722-4/DNS-726-4 User Manual 14
  • D-Link DNS-726-4 | Product Manual - Page 19
    NVR will initialize the Hard Disk to default settings. To change Hard Disk settings, please visit the SETUP page in the web-based configuration utility. Supported Cameras DNS-722-4: Supports all D-Link network cameras. Includes support for auto-discovery, and up to 1.3 megapixel resolution. DNS-726
  • D-Link DNS-726-4 | Product Manual - Page 20
    Section 2 - Installation Connecting Your NVR to the Network Network Setup D-Link DNS-722-4/DNS-726-4 User Manual 16
  • D-Link DNS-726-4 | Product Manual - Page 21
    Started Step 1: Make sure the NVR is connected to a network via a router or a switch, or directly connected to a PC. Step 2: Turn on the computer and insert the D-Link DNS-722-4/DNS-726-4 Autorun CD into the CD-ROM drive. The following step-by-step instructions appear when using Windows Vista
  • D-Link DNS-726-4 | Product Manual - Page 22
    on the name or IP of an NVR will also open a web browser. LAN: Configure the LAN Settings for the NVR here. Apply: Click Apply to save and activate changes to the LAN Settings. System Info: The system information for the selected NVR is displayed here. D-Link DNS-722-4/DNS-726-4 User Manual 18
  • D-Link DNS-726-4 | Product Manual - Page 23
    , while JBOD combines both disks into a single volume. See page 42 for more details on using the RAID configurations. Note: Refer to page 40 for instructions on how to change the password of your admin account. D-Link DNS-722-4/DNS-726-4 User Manual 19
  • D-Link DNS-726-4 | Product Manual - Page 24
    1. Click Next to continue. A warning message appears informing you that your drives will be formatted and all data will be erased. Click OK to continue. D-Link DNS-722-4/DNS-726-4 User Manual 20
  • D-Link DNS-726-4 | Product Manual - Page 25
    : Press Restart to restart the NVR. Type admin for the username and leave the password field blank. Click Login Note: After logging in to the NVR for the first time it is recommended to add a password to the admin account. (See page 40 for details.) D-Link DNS-722-4/DNS-726-4 User Manual 21
  • D-Link DNS-726-4 | Product Manual - Page 26
    Section 3 - Configuration After login, you will be redirected to the NVR web UI: D-Link DNS-722-4/DNS-726-4 User Manual 22
  • D-Link DNS-726-4 | Product Manual - Page 27
    Contains the DNS-722-4/DNS-726-4 setup wizard, as well as the LAN configuration settings, camera search, camera settings, NVR, and event logs. These pages and their configuration options will be discussed in detail in the following pages of this manual. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 28
    . When running the NVR setup wizard, the welcome screen details the five steps of the wizard. Click Next to continue. It is recommended you set an admin password here. Enter the new password and re-enter it for confirmation. Click Next to continue. D-Link DNS-722-4/DNS-726-4 User Manual 24
  • D-Link DNS-726-4 | Product Manual - Page 29
    IP address, the subnet mask of your network, the Gateway IP address (usually the IP adress of your router) and the IP address of your DNS Server(s). Click Next to continue. Note: The IP address(es) of your NVR and camera(s) must be in the same network. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 30
    the NVR, or leave the default values and click Next to continue. When the wizard completes, click Back to go back and make changes or click Restart to restart the NVR and save the configuration. While the NVR is restarting, a countdown screen will appear. D-Link DNS-722-4/DNS-726-4 User Manual 26
  • D-Link DNS-726-4 | Product Manual - Page 31
    Section 3 - Configuration When the login prompt appears, login using the new administrator password. D-Link DNS-722-4/DNS-726-4 User Manual 27
  • D-Link DNS-726-4 | Product Manual - Page 32
    Always Record and select connected cameras. After completing the above settings, the NVR will be fully camera digital output. Step 3: Dynamic DNS - Configure DDNS to access your NVR using a domain name without the need to track the IP address of your NVR. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 33
    . PPPoE Settings: Enable this setting if your ISP (DSL service) is using PPPoE. You may already have a Username and Password provided by your ISP, or you may need to contact your ISP. The connection status will be determined automatically by the system. D-Link DNS-722-4/DNS-726-4 User Manual 29
  • D-Link DNS-726-4 | Product Manual - Page 34
    if cameras are not immediately displayed. Step 4: Click the Add button to add the selected camera. Step 5: After clicking Add, the updated information will be displayed in the Camera List. Step 6: Repeat step 2 through 5 to add other cameras into your list. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 35
    : If you have already input the camera IP, you may simply click this button to automatically detect camera information (such as the channel, protocol, vendor, and model number). Note Some cameras will limit the login authority to the administrator only. D-Link DNS-722-4/DNS-726-4 User Manual 31
  • D-Link DNS-726-4 | Product Manual - Page 36
    be configured via the camera web interface to enable the NVR to receive the trigger message. Step 3: Click the Save Settings button. Note: The system will adjust the frame rate automatically based on the maximum frame rate which that camera can support. D-Link DNS-722-4/DNS-726-4 User Manual 32
  • D-Link DNS-726-4 | Product Manual - Page 37
    Maximum Connections in Live Streaming Server settings, 1 connection means that 1 user can connect to 1 camera only. If the maximum number of connections is 16 and if each user connects to 4 cameras, then the maximum number of connected users is 4 and not 16. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 38
    to the schedule you can create. Refer to the next page. Always Record: Check the camera to always record. Automatic Overwrite: Enable this option to automatically empty disk space when the disk video clips. After the duration, the clips will be purged. D-Link DNS-722-4/DNS-726-4 User Manual 34
  • D-Link DNS-726-4 | Product Manual - Page 39
    the Schedule Step 1: Select the schedule of the camera you want to modify. Step 2: Click the column at the bottom of the page. Step 3: The default recording schedule is from 00:00 to 24:00. If you want to modify the time slot, click the Configure button. D-Link DNS-722-4/DNS-726-4 User Manual 35
  • D-Link DNS-726-4 | Product Manual - Page 40
    a camera, the NVR can send out warning signals to the other connected cameras. • Alternatively users can drag the time bar to change the recording period. The red bar represents the Always Record feature and the blue bar represents the Event Recording feature. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 41
    option may be configured and applied using DNS-726-4. Step 1: Choose the camera, and then select one of the three events. Connection lost: Action is triggered if the connection between the camera and NVR is lost. Motion Detected: All motions from camera will trigger the action. Input: External
  • D-Link DNS-726-4 | Product Manual - Page 42
    ) server IP address. Sender password. Add Contacts Step 1: Insert the name of a new contact. Step 2: Insert the E-mail address of this new contact. Step 3: Click the Add Contact button. Step 4: Click the Save Settings button to save the new contact list. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 43
    in all three fields. Password or Enter the password or key provided by your Key: service provider. Verify Re-type the password or key provided by your Password or service provider. Key: Status: Displays the current status of connection to the DDNS server. D-Link DNS-722-4/DNS-726-4 User Manual 39
  • D-Link DNS-726-4 | Product Manual - Page 44
    entering an NTP Server. From My Click Set Time to have the NVR set its own clock Computer: according to the time on your computer. Manually Set Enter the complete time and date settings the Time and manually. Click Set Time to apply the settings. Date: D-Link DNS-722-4/DNS-726-4 User Manual 40
  • D-Link DNS-726-4 | Product Manual - Page 45
    List Change User's Password Step 1: Click the Modify Password icon of the user name who you would like to modify. Step 2: Input the password of the user. Type the password again to confirm. Step 3: Click the Apply button to save. Click Cancel to abort. D-Link DNS-722-4/DNS-726-4 User Manual 41
  • D-Link DNS-726-4 | Product Manual - Page 46
    List. Step 2: Select the live view cameras and PTZ/IO Control functions which this user can access. Step 3: Select the playback channels and Backup Data functions which this user can access. Step 4: Click the Apply button to save. Click Cancel to abort. D-Link DNS-722-4/DNS-726-4 User Manual 42
  • D-Link DNS-726-4 | Product Manual - Page 47
    hard drive fails, the other still has all of the data. Replace the failed hard drive and it will re-mirror, restoring maximum data protection. D-Link DNS-722-4/DNS-726-4 User Manual 43
  • D-Link DNS-726-4 | Product Manual - Page 48
    different levels of RAID, with each providing a different method of sharing or distributing data amongst the drives. The NVR supports RAID levels 0 and 1. RAID 0 RAID 0 provides data tolerance and protection, in addition to performance advantages. RAID 1 D-Link DNS-722-4/DNS-726-4 User Manual 44
  • D-Link DNS-726-4 | Product Manual - Page 49
    Restart button on the NVR. Restarting the NVR will take about one and a half minutes. Reset to Default: This will reset all configurations to factory default. User can select to preserve the IP or DDNS, thus the remote connection will remain after reset. D-Link DNS-722-4/DNS-726-4 User Manual 45
  • D-Link DNS-726-4 | Product Manual - Page 50
    . The firmware update must be saved on the local hard drive of your computer. Click the Browse button to search the local hard drive for the firmware update file. Click Apply to upgrade. You may always check for firmware updates on the D-Link Support Page. D-Link DNS-722-4/DNS-726-4 User Manual 46
  • D-Link DNS-726-4 | Product Manual - Page 51
    the transmission bit rate of the camera. Disk Status: Shows the hard drive space and estimated remaining recording time status. Note: The recording time information is estimated by current bit rate. This may change each time a user refreshes this page. D-Link DNS-722-4/DNS-726-4 User Manual 47
  • D-Link DNS-726-4 | Product Manual - Page 52
    name and current Information: temperature of the NVR. UPS Displays the connected UPS status from USB Information: connection. Hard Drive Displays the hard drive information, including Information: the disk mode, total size, used and remaining drive space. D-Link DNS-722-4/DNS-726-4 User Manual 48
  • D-Link DNS-726-4 | Product Manual - Page 53
    Log This page displays the system event list of your NVR. The System Log is different from the NVR Log as it includes the following items: 1. User login/logout 2. Modify/delete account 3. System restart 4. System reset to default 5. System firmware update D-Link DNS-722-4/DNS-726-4 User Manual 49
  • D-Link DNS-726-4 | Product Manual - Page 54
    NVR Log This NVR Log displays the event log information. NVR Log: Displays the NVR log information such as stop recording or NVR system start. NVR Event Displays the event log information such as Log: motion detection or lost camera connection. D-Link DNS-722-4/DNS-726-4 User Manual 50
  • D-Link DNS-726-4 | Product Manual - Page 55
    Section 3 - Configuration Help The NVR Help page provides a list of support topics. D-Link DNS-722-4/DNS-726-4 User Manual 51
  • D-Link DNS-726-4 | Product Manual - Page 56
    and listen to live audio of this channel. 4. If the camera supports PTZ, users can control the selected camera from the PTZ panel. Users can also right click on indicates that another camera cannot be adjusted until the PTZ function has been deactivated. D-Link DNS-722-4/DNS-726-4 User Manual 52
  • D-Link DNS-726-4 | Product Manual - Page 57
    control panel to adjust the camera's view. This is only Control: available with cameras that support the PTZ function. Zoom: Click the + or - button to zoom in or zoom out. This option is only available with cameras that support the optical zoom function. D-Link DNS-722-4/DNS-726-4 User Manual 53
  • D-Link DNS-726-4 | Product Manual - Page 58
    preset position for a camera with PTZ support. Users can give camera name, video status, and bit rate for a selected channel. Window: Remote I/O: Utilize I/O device function remotely. User can remotely adjust the external output device by turning it on or off. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 59
    the available video clips. Select the date you would like to find the video records. Step 5: Highlight the video records that you would like to review. Step 6: Click the OK button. D-Link DNS-722-4/DNS-726-4 User Manual 55
  • D-Link DNS-726-4 | Product Manual - Page 60
    Information Window Single/Quad User may view a single camera or 4 cameras at a time. The DNS-722-4 only supports 1 camera playback. split Screen: Full Screen: Select to display the icon to digitally zoom in or out. Every camera can use this function. D-Link DNS-722-4/DNS-726-4 User Manual 56
  • D-Link DNS-726-4 | Product Manual - Page 61
    Step Forward/Reverse Fast Forward/Reverse Cue In/Cue Out Play/Stop/Pause Play/Stop/Pause: Select a camera/ video and click this button to play/stop/pause a particular channel. Speed: Click the + or the playback and move to next minute or last minute. D-Link DNS-722-4/DNS-726-4 User Manual 57
  • D-Link DNS-726-4 | Product Manual - Page 62
    button to access the Date-Time Panel and select the video records which you would like to review. Record Display Calendar View: Recordings are displayed as a calendar. List Control: Recordings are displayed click the Reverse button on the control panel. D-Link DNS-722-4/DNS-726-4 User Manual 58
  • D-Link DNS-726-4 | Product Manual - Page 63
    : The image will be saved in the clipboard and can be pasted to other applications. Manually save the You can manually select where you would like to save the image, name the saved file, and choose the you click the Save Image button in the control panel. D-Link DNS-722-4/DNS-726-4 User Manual 59
  • D-Link DNS-726-4 | Product Manual - Page 64
    and end points that indicate the time period you would like to view. Video Preview: Check the Enable Preview option to view the selected video. D-Link DNS-722-4/DNS-726-4 User Manual 60
  • D-Link DNS-726-4 | Product Manual - Page 65
    clips. Step 3: Highlight the video clip you would like to review by left-clicking and dragging the time period. You may also preview of the video you select. Step 5: Click the camera name to select the cameras you would like to play back. Step 6: Click the D-Link DNS-722-4/DNS-726-4 User Manual 61
  • D-Link DNS-726-4 | Product Manual - Page 66
    5 types of unusual events: General Motion, Foreign Object, Missing Object, Lose Focus, and Camera Occlusion. General Motion Detect all movements in the defined area. 1. Define a detection zone by at the moment the event found. 5. Click the Search button. D-Link DNS-722-4/DNS-726-4 User Manual 62
  • D-Link DNS-726-4 | Product Manual - Page 67
    events it found, instead of stopping at the moment the event found. 5. Click the Search button. Lose Focus The system will inform you when the camera(s) loses focus. Camera Occlusion Alarm triggers when the camera is blocked. D-Link DNS-722-4/DNS-726-4 User Manual 63
  • D-Link DNS-726-4 | Product Manual - Page 68
    this option to display the image in black and white. Stop: Stop the enhancement function and close the enhancement tool. (The system will reset to the default settings automatically.) Default: Reset settings to their defaults. OK: Apply the modifications. D-Link DNS-722-4/DNS-726-4 User Manual 64
  • D-Link DNS-726-4 | Product Manual - Page 69
    Section 3 - Configuration Save Video Step 1: During playback, users can choose the camera where they would like to save a video clip. Step 2: Set the cue in and exporting video. The .avi format will have a higher frame rate but will not include a timestamp. D-Link DNS-722-4/DNS-726-4 User Manual 65
  • D-Link DNS-726-4 | Product Manual - Page 70
    Save Image Step 1: During playback, users can choose to save an image from a selected camera. Step 2: Click the Save Image button when the desired image is shown on the screen a folder and format for images. See the "Setting" option for more details. D-Link DNS-722-4/DNS-726-4 User Manual 66
  • D-Link DNS-726-4 | Product Manual - Page 71
    , center or bottom. Print Content: Print the image from currently selected channel or all the channels shown on the screen. Step 4: Click the Print button. D-Link DNS-722-4/DNS-726-4 User Manual 67
  • D-Link DNS-726-4 | Product Manual - Page 72
    Time that you would like to backup. Step 4: Select the cameras that you would like to backup. Step 5: Select the directory where you would like to backup the data to. Step 6: Click the Backup button. The system will then begin backup process automatically. D-Link DNS-722-4/DNS-726-4 User Manual 68
  • D-Link DNS-726-4 | Product Manual - Page 73
    D-Link -> Multi-NVR Viewer PTZ Camera Control: Control the camera view by utilizing the PTZ camera control panel to adjust the camera's view. This is only available with cameras that support the I/O: Users can remotely adjust the external I/O device. D-Link DNS-722-4/DNS-726-4 User Manual 69
  • D-Link DNS-726-4 | Product Manual - Page 74
    Name this group. Step 5: Highlight the camera(s) that you would like to add into this group and then click the
  • D-Link DNS-726-4 | Product Manual - Page 75
    Section 3 - Configuration Delete/Rename Groups for Cameras Step 1: Click the Site Setup button. Step 2: Click to access your unit. Step 3: Select the camera(s) from the camera list on the right, and then drag it to where you wish the image to be displayed. D-Link DNS-722-4/DNS-726-4 User Manual 71
  • D-Link DNS-726-4 | Product Manual - Page 76
    or digital zoom out the view. Every camera can use this function. Play/Stop/ Select a camera/video and click this button to play/stop/pause a particular channel. Pause: Speed: Click the + or - button to increase or decrease the playback speed. D-Link DNS-722-4/DNS-726-4 User Manual Remote Server 72
  • D-Link DNS-726-4 | Product Manual - Page 77
    IP address of that unit. Step 4: Modify the port if necessary. Step 5: Input the user name. Step 6: Input the password. Step 7: Check the Save Password option. Step 8: Click the Test Server button to test the connection Explorer, please see page 60-68. D-Link DNS-722-4/DNS-726-4 User Manual 73
  • D-Link DNS-726-4 | Product Manual - Page 78
    ). Step 8: Select the cameras you would like to backup. Step 9: Click the OK button. Step 10: Select the time slot which you would like to backup. Step 11: Click the Backup button. Step 12: Select the location where you would like to save the backup data. D-Link DNS-722-4/DNS-726-4 User Manual 74
  • D-Link DNS-726-4 | Product Manual - Page 79
    OK button. Delete the Recorded Video Step 1: Explorer (insert "\\" plus the IP address of your unit). Step 2: Use the administrator's ID and password to login. You may also use a user's ID who has the "delete the day in which you do the delete process. D-Link DNS-722-4/DNS-726-4 User Manual 75
  • D-Link DNS-726-4 | Product Manual - Page 80
    - Troubleshooting Troubleshooting Check the System Status LED The system status LED reports the condition of the enclosure fan and power supply: Solid Blue: NVR is functioning normally Blinking Blue: NVR is the Status -> Device Info tab from the menu. D-Link DNS-722-4/DNS-726-4 User Manual 76
  • D-Link DNS-726-4 | Product Manual - Page 81
    the reset button for 5 seconds until the Power LED flashes three times. The Administrator password will now be blank. Caution When you reset or recover your unit, sometimes it will cause data corruption. Backup your recorded data before resetting your unit. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 82
    Section 4 - Troubleshooting Install ActiveX If you Vista limits the authority of some users, which cause the system to reject a connection through Windows Explorer. In this condition, you must change the settings of Vista of or disable anti-virus software. D-Link DNS-722-4/DNS-726-4 User Manual 78
  • D-Link DNS-726-4 | Product Manual - Page 83
    processing data requests in parallel since the same data resides on two different drives Disadvantage  Very high disk overhead - uses only 50% of total capacity D-Link DNS-722-4/DNS-726-4 User Manual 79
  • D-Link DNS-726-4 | Product Manual - Page 84
    the new drive, turn on the NVR and then connect to the Web UI. The NVR will prompt you to format the new drive. Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting a hard drive. D-Link DNS-722-4/DNS-726-4 User Manual 80
  • D-Link DNS-726-4 | Product Manual - Page 85
    Zoom Out) D-Link DNS-722-4/DNS-726-4 User Manual Remote Playback • Supported via IE and NVR client • Playback system with timeline GUI, search by event, area, cameras, date and time • DNS-722-4: IE & NVR client support 1 channel playback • DNS-726-4: IE & NVR client support 4 channel simultaneous
  • D-Link DNS-726-4 | Product Manual - Page 86
    Service Protocols • IPV4, ARP, TCP, UDP, ICMP • DHCP Client • NTP Client (D-Link) • DNS Client • DDNS Client (D-Link) • SMTP Client • HTTP Server • PPPoE • UPnP • IP filtering User Interface • HTTP Web browser - Internet Explorer v6 or later • NVR /3A Reset Button • Reset to factory default Power
  • D-Link DNS-726-4 | Product Manual - Page 87
    NVR • Power Adapter • Ethernet Cable • Quick Installation Guide • Power Cable Holder • Keys • CD-ROM with: - Software - Product Documentation 1 An external SATA drive is required to store or share the DNS-722-4/DNS-726-4, visit the D-Link support web site. D-Link DNS-722-4/DNS-726-4 User Manual 83
  • D-Link DNS-726-4 | Product Manual - Page 88
    Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DNS-722-4/DNS-726-4 User Manual 84
  • D-Link DNS-726-4 | Product Manual - Page 89
    the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, . • The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the dlink.com/. D-Link DNS-722-4/DNS-726-4 User Manual 85
  • D-Link DNS-726-4 | Product Manual - Page 90
    firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link , FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. D-Link DNS-722-4/DNS-726-4 User Manual 86
  • D-Link DNS-726-4 | Product Manual - Page 91
    D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 92
    with the instructions, may cause connected. • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DNS-722-4/DNS-726-4 User Manual
  • D-Link DNS-726-4 | Product Manual - Page 93
    Appendix C - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 April 17, 2009 D-Link DNS-722-4/DNS-726-4 User Manual 89
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93