D-Link DSL-300I User Guide - Page 30

CDSL-300 Firmware Upgrade Utility - downloads

Get D-Link DSL-300I - DSL 300 - 8 Mbps Modem PDF manuals and user guides View all D-Link DSL-300I manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

DSL-300 ADSL Ethernet Modem User's Guide C DSL-300 Firmware Upgrade Utility You can update system firmware using the DSL-300 Firmware Upgrade Utility. To upgrade the Router's firmware you must have installed this software on the PC you wish to use for this purpose. Install the utility by clicking the selfexecuting file setup.exe located on the Installation CD-ROM. It will be installed automatically. It is recommended that the PC be directly connected to the Router using a crossed cable, however you may upgrade it through the LAN from a remote host. You also need to download the latest firmware version file from the D-Link web site to the PC on which you will use the Upgrade Utility. Instructions for downloading the firmware are located on the web site at www.dlink.com. To launch the DSL-300 Firmware Upgrade Utility, click on the icon. Allow a few moments for the software to discover the Router on the network. After the discovery phase the following window will appear. You will see all the DSL-300 Routers on your network. You can identify individual devices by either its IP address or its MAC address. Select the device you wish to upgrade by double clicking on it. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
DSL-300 ADSL Ethernet Modem User’s Guide
22
C
DSL-300 Firmware Upgrade Utility
You can update system firmware using the DSL-300 Firmware Upgrade Utility.
To upgrade the Router’s firmware you must have installed this software on the
PC you wish to use for this purpose. Install the utility by clicking the self-
executing file
setup.exe
located on the Installation CD-ROM. It will be installed
automatically. It is recommended that the PC be directly connected to the Router
using a crossed cable, however you may upgrade it through the LAN from a
remote host.
You also need to download the latest firmware version file from the D-Link web
site to the PC on which you will use the Upgrade Utility. Instructions for
downloading the firmware are located on the web site at
www.dlink.com
.
To launch the DSL-300 Firmware Upgrade Utility, click on the icon. Allow a few
moments for the software to discover the Router on the network. After the
discovery phase the following window will appear. You will see all the DSL-300
Routers on your network. You can identify individual devices by either its IP
address or its MAC address. Select the device you wish to upgrade by double
clicking on it.