D-Link DSL-302G Installation Guide
D-Link DSL-302G - 8 Mbps DSL Modem Manual
 |
View all D-Link DSL-302G manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DSL-302G manual content summary:
- D-Link DSL-302G | Installation Guide - Page 1
not know these information, please contact your ISP. Check Your Package Contents DSL-302G ADSL USB/Ethernet Modem CD-ROM (containing Manual, Drivers and Warranty) Ethernet (CAT5 UTP) Cable (blue) RJ-11 Telephone Cord (black) USB Cable (transparent) Device Feet (one pair) 9V DC, 1A Power Adapter - D-Link DSL-302G | Installation Guide - Page 2
all Operating Systems. USB Port Ethernet Port Make sure that your ADSL service is enabled. If you are guide for more information. For USB Installation, please continue to step For Ethernet Installation, please continue to step USB Installation (for Windows 98SE/Me/2K/XP) Insert the DSL-302G - D-Link DSL-302G | Installation Guide - Page 3
Click Next Enter in a User Name and Company name. Click Next Click Next - D-Link DSL-302G | Installation Guide - Page 4
Make sure both boxes are checked. Click Next Click Next Follow the on-screen instructions to physically connect the modem before moving further. Click Next - D-Link DSL-302G | Installation Guide - Page 5
After the computer restarts, the USB drivers should now be installed. Please proceed to step to configure the DSL-302G. Ethernet Installation (for all Operating Systems) Connect the DSL-302G to a suitable power source. , a green LED on the front of the device labeled Ethernet/Link will glow steadily. - D-Link DSL-302G | Installation Guide - Page 6
Configuration Utility allows you to change the VPI/VCI settings of the DSL-302G to connect to your ISP and also displays ADSL connection information. The DSL-302G comes with a default VPI of "0" and a VCI of "35". If your DSL service provider uses different numbers, change these numbers on the modem - D-Link DSL-302G | Installation Guide - Page 7
-click on the MAC address of the DSL-302G or highlight it and press the Enter or Return key. You should now be prompt for the password. The default password is "admin". Click Ok Click on the General ADSL Information tab. The new menu lists 8 channels available for configuration. You need to change - D-Link DSL-302G | Installation Guide - Page 8
new settings and automatically restart. Click Yes Note: Do not manually restart the modem. It will automatically restart by itself. When the DSL-302G has been fully restarted, then it will be ready for use. The power LED, status LED, ADSL LED, and Ethernet or USB LED should now remain solid green. - D-Link DSL-302G | Installation Guide - Page 9
Your Setup is Complete! You have now installed and configured the DSL-302G modem. Your ISP may require you to install other software such as a PPPoE client. If so, please do that now. Your connection may look similar to this: - D-Link DSL-302G | Installation Guide - Page 10
provider and must be installed on every normal telephone in the house, apartment or office where you are installing the DSL modem. Micro-filters ensure that the new DSL data signal and the normal voice signal do not interfere with each other as they travel on the same telephone line. Install a micro - D-Link DSL-302G | Installation Guide - Page 11
page. All phones, faxes, answering machines, etc. must have micro-filters installed before you can use the DSL modem. If you do not have enough micro-filters and wish to begin using the DSL modem, unplug the devices that do not have a micro-filter and leave them unplugged until you can obtain more - D-Link DSL-302G | Installation Guide - Page 12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
This product can be set up
using any current web
browser, i.e., Internet Explorer,
Netscape Navigator.
DSL-302G
ADSL USB/Ethernet
Modem
9V DC, 1A Power Adapter
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DSL-302G.09232002
Read This First!
Check Your Package Contents
DSL-302G ADSL USB/Ethernet Modem
CD-ROM (containing Manual, Drivers and
Warranty)
Ethernet (CAT5 UTP) Cable (blue)
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
If any of the above items are missing, please contact your reseller.
This Quick Installation Guide introduces you to your new DSL modem and walks you
step-by-step through the process of installing the modem on your computer. Please make
sure to follow each step carefully. For more detailed information on the functions and
features of the DSL modem, please refer to the User’s Manual located on the included
CD-ROM.
RJ-11 Telephone Cord (black)
USB Cable (transparent)
Device Feet (one pair)
Before continuing, you will need to know the VPI/VCI numbers and the
encapsulation method (LLC or VC Mux) used for the ADSL connection. If
you do not know these information, please contact your ISP.