D-Link DSL-302G Installation Guide - Page 7
Update - dsl default password
View all D-Link DSL-302G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Double-click on the MAC address of the DSL-302G or highlight it and press the Enter or Return key. You should now be prompt for the password. The default password is "admin". Click Ok Click on the General ADSL Information tab. The new menu lists 8 channels available for configuration. You need to change settings for only one channel in order to use the ADSL modem. Click on the first channel listed to highlight it, this is the default channel used by the modem. Click Update admin In the new menu screen you must enter new values for the VPI and VCI settings. You also must choose the Encapsulation method used (LLC or VC Mux) from the pull-down menu. Your service provider will supply this information. Click Set Note: The default settings for the modem are VPI of "0" and a VCI of "35". The default encapsulation method used is LLC.