D-Link DSN-1100-10 Hardware Reference Guide for DSN-1100-10 Valid for fir - Page 25
Appendix A, Replacing and Upgrading FRUs
UPC - 790069321559
View all D-Link DSN-1100-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Appendix A Replacing and Upgrading FRUs This appendix describes how to replace or upgrade the Field Replaceable Units (FRUs) in your DSN-1100 storage system. FRUs that can be replaced or upgraded include: Battery Pack System and buffer memory SATA drives Fans Power supply A.1 Removing the Cover To remove the cover, use the following procedure. 1. Power down the DSN-1100 storage system and remove the power cord from the back panel. 2. Attach an ESD-preventive wrist strap. 3. Remove the six screws as shown in Figure A-1. 4. Slide the cover towards the rear and remove as shown in Figure A-2. 5. To replace the cover, reverse these steps. DSN-1100 Hardware Reference Guide 25
DSN-1100 Hardware Reference Guide
25
Appendix A
Replacing and Upgrading FRUs
This appendix describes how to replace or upgrade the Field Replaceable Units (FRUs) in your
DSN-1100 storage system. FRUs that can be replaced or upgraded include:
Battery Pack
System and buffer memory
SATA drives
Fans
Power supply
A.1
Removing the Cover
To remove the cover, use the following procedure.
1.
Power down the DSN-1100 storage system and remove the power cord from the back
panel.
2.
Attach an ESD-preventive wrist strap.
3.
Remove the six screws as shown in Figure A-1.
4.
Slide the cover towards the rear and remove as shown in Figure A-2.
5.
To replace the cover, reverse these steps.