D-Link DSN-1100-10 Hardware Reference Guide for DSN-1100-10 Valid for fir - Page 35
Installing or Replacing SATA Drive, A.3.1 Drive and Tray Removal
UPC - 790069321559
View all D-Link DSN-1100-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
A.3 Installing or Replacing SATA Drive Removal of a populated drive/tray assembly can have unforeseen effects including the loss of all data in a volume. A drive can be part of a volume that may or may not be redundant. Before removing a drive from an operating xStack Storage Array, make sure it is the correct one. A.3.1 Drive and Tray Removal A drive/tray assembly can be removed by pressing upwards on the green latch found on the tray and removing it with the handle as shown in Figure A-15 and Figure A-16. Figure A-15 Drive and Tray Removal Figure A-16 Remove Drive/Tray DSN-1100 Hardware Reference Guide 35
DSN-1100 Hardware Reference Guide
35
A.3
Installing or Replacing SATA Drive
Removal of a populated drive/tray assembly can have unforeseen effects
including the loss of all data in a volume.
A drive can be part of a volume
that may or may not be redundant.
Before removing a drive from an
operating xStack Storage Array, make sure it is the correct one.
A.3.1 Drive and Tray Removal
A drive/tray assembly can be removed by pressing upwards on the green latch found on the
tray and removing it with the handle as shown in Figure A-15 and Figure A-16.
Figure A-15
Drive and Tray Removal
Figure A-16
Remove Drive/Tray