D-Link DSN-610 User Manual for DSN-6110 & DSN-6110 with DSN-610 - Page 117
Troubleshooting
View all D-Link DSN-610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 6 Troubleshooting 6.1 System buzzer The system buzzer features are listed below: 1. The system buzzer alarms 1 second when system boots up successfully. 2. The system buzzer alarms continuously when there is error occurred. The alarm will be stopped after error resolved or be muted. 3. The alarm will be muted automatically when the error is resolved. E.g., when RAID 5 is degraded and alarm rings immediately, user changes / adds one physical disk for rebuilding. When the rebuilding is done, the alarm will be muted automatically. 6.2 Event notifications • PD events Level Type Description INFO WARNING ERROR ERROR ERROR ERROR INFO INFO WARNING PD inserted PD removed HDD read error HDD write error HDD error HDD IO timeout PD upgrade started PD upgrade finished PD upgrade failed Disk is inserted into system Disk is removed from system Disk read block error Disk write block error Disk is disabled Disk gets no response PD [] starts upgrading firmware process. PD [] finished upgrading firmware process. PD [] upgrade firmware failed. • HW events Level Type Description WARNING ERROR INFO INFO INFO ERROR ERROR ERROR ERROR ECC single ECC multiple ECC dimm ECC none SCSI bus reset SCSI host error SATA enable device fail SATA EDMA mem fail SATA remap mem fail Single-bit ECC error is detected at Multi-bit ECC error is detected at ECC memory is installed Non-ECC memory is installed Received SCSI Bus Reset event at the SCSI Bus SCSI Host allocation failed Failed to enable the SATA pci device Failed to allocate memory for SATA EDMA Failed to remap SATA memory io spcae 117