Dacor ERD30 User Manual - Epicure Range - Page 18

Manual Cleaning Continued

Page 18 highlights

Care and Cleaning Manual Cleaning (Continued) Door Glass • Clean all glass surfaces with a solution of mild detergent and hot water. Use a mild glass cleaner to remove fingerprints or smears. Dry completely with a soft, lint-free cloth. Stainless Steel Surfaces • The control panel, door(s) bullnose and side panels are covered with stainless steel. Clean these surfaces with the provided Dacor Stainless Steel Cleaner. Rinse and dry with a soft, lint-free cloth. Always wipe stainless steel surfaces with the grain. A small amount of baby oil may be applied to stainless steel tops to restore lustre. IMPORTANT: If commercially available stainless steel cleaners are used, it is important to read the labels for chlorine compounds. Chlorine is a corrosive substance. If these compounds are present, rinse thoroughly and dry with a soft, lint-free cloth. Oven Convection Filter WARNING • The convection filter is made of stainless steel. Remove it only when it is cool. • Re-install the filter before cooking in the oven again. Failure to do so will expose the convection fan blade that rotates at high speed during convection modes. • Remove the filter regularly for cleaning. A clogged filter will reduce the effectiveness of convection cooking modes. Soak it in hot soapy water. Dry it completely before re-installing. Porcelain Surfaces IMPORTANT: The oven interior inner door liners and cooktop spill trays are finished in porcelain enamel. • Clean porcelain surfaces with a solution of mild detergent and hot water. Rinse and dry with a soft cloth. Do not use abrasives or commercial oven cleaners. Always remove excess grease and soil from the oven interior and door prior to using the self-clean cycle. Brass, Chrome and Copper Surfaces Clean brass, chrome and copper surfaces the same way as stainless steel surfaces (see above). Convection Filter Removal • Also, it is best to remove the filter during selfcleaning. When the filter is left in the oven during self-clean, it will permanently discolor. • To reinstall the filter, orient it so that the two mounting tabs are towards the rear of the oven chamber, open end down. Hook the two mounting tabs over the center horizontal bar. Oven Racks • The oven racks are chrome-plated. For everyday cleaning, apply a solution of detergent and hot water. To clean heavy soil, use the rough side of a sponge or a scouring pad with plenty of water, or use a solution of 1 cup ammonia to 2 gallons of water. IMPORTANT: Remove the racks during self-cleaning. If racks are left in the oven during self-cleaning, they will permanently discolor. Broiler Pan The oven broiler pan is finished in porcelain enamel. Clean both components in a solution of detergent and hot water. For heavy soil conditions, use a scouring pad such as steel wool with plenty of water. Rinse well after cleaning. 16 Convection Filter Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

16
Oven Convection Filter
WARNING
The convection filter is made of stainless steel.
Remove it only when it is cool.
Re-install the filter before cooking in the oven again.
Failure to do so will expose the convection fan blade
that rotates at high speed during convection modes.
Remove the filter regularly for cleaning. A
clogged filter will reduce the effectiveness of
convection cooking modes. Soak it in hot soapy
water. Dry it completely before re-installing.
Convection Filter Removal
Also, it is best to remove the filter during self-
cleaning. When the filter is left in the oven
during self-clean, it will permanently discolor.
To reinstall the filter, orient it so that the two
mounting tabs are towards the rear of the oven
chamber, open end down. Hook the two mount-
ing tabs over the center horizontal bar.
Convection Filter Installation
Care and Cleaning
Manual Cleaning (Continued)
Door Glass
Clean all glass surfaces with a solution of mild
detergent and hot water. Use a mild glass
cleaner to remove fingerprints or smears. Dry
completely with a soft, lint-free cloth.
Stainless Steel Surfaces
The control panel, door(s) bullnose and side
panels are covered with stainless steel. Clean
these surfaces with the provided Dacor Stainless
Steel Cleaner. Rinse and dry with a soft, lint-free
cloth. Always wipe stainless steel surfaces with
the grain. A small amount of baby oil may be
applied to stainless steel tops to restore lustre.
IMPORTANT:
If commercially available stainless
steel cleaners are used, it is important to read the
labels for chlorine compounds. Chlorine is a cor-
rosive substance. If these compounds are present,
rinse thoroughly and dry with a soft, lint-free cloth.
Porcelain Surfaces
IMPORTANT:
The oven interior inner door liners
and cooktop spill trays are finished in porcelain
enamel.
Clean porcelain surfaces with a solution of mild
detergent and hot water. Rinse and dry with a
soft cloth. Do not use abrasives or commercial
oven cleaners. Always remove excess grease
and soil from the oven interior and door prior to
using the self-clean cycle.
Brass, Chrome and Copper Surfaces
Clean brass, chrome and copper surfaces the same
way as stainless steel surfaces (see above).
Oven Racks
The oven racks are chrome-plated. For everyday
cleaning, apply a solution of detergent and hot
water. To clean heavy soil, use the rough side of
a sponge or a scouring pad with plenty of water,
or use a solution of 1 cup ammonia to 2 gallons
of water.
IMPORTANT:
Remove the racks during self-clean-
ing. If racks are left in the oven during self-cleaning,
they will permanently discolor.
Broiler Pan
The oven broiler pan is finished in porcelain
enamel. Clean both components in a solution of
detergent and hot water. For heavy soil conditions,
use a scouring pad such as steel wool with plenty of
water. Rinse well after cleaning.