Dell Alienware 17 Owner's Manual - Page 16
Removing the Battery, Prerequisites, Procedure - base
View all Dell Alienware 17 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Removing the Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 11. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 13. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. See "Removing the Base Cover" on page 14. Procedure 1 Disconnect the battery cable from the system board. 2 Remove the screws that secure the battery to the computer base. 3 Using the battery cable, lift and release the battery from the tabs on the computer base. 2 1 3 4 1 battery cable 3 battery 2 screws (2) 4 tabs (2) 4 Turn the computer over and open the display. 5 Press and hold the power button for five seconds to ground the system board. Removing the Battery | 16