Dell C1660W Dell Users Guide - Page 132

Protocol, IP Filter, Reset LAN, No. n/Mode

Page 132 highlights

Protocol Purpose: To enable or disable each protocol. The change takes effect after the printer is turned off and then on. Values: LPD Enable* Disable Port9100 Enable* Disable WSD Enable* Disable SNMP UDP Enable* Disable E-Mail Alert Enable* Disable EWS Enable* Disable Bonjour (mDNS) Enable* Disable Enables the Line Printer Daemon (LPD) port. Disables the LPD port. Enables the Port9100 port. Disables the Port9100 port. Enables the Web Services on Devices (WSD) port. Disables the WSD port. Enables the UDP port. Disables the UDP port. Enables the E-mail Alert feature. Disables the E-mail Alert feature. Enables an access to Dell Printer Configuration Web Tool embedded in the printer. Disables an access to Dell Printer Configuration Web Tool embedded in the printer. Enables the Bonjour (mDNS). Disables the Bonjour (mDNS). IP Filter Purpose: To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP addresses. The change takes effect after the printer is turned off and then on. Values: No. n/Address (n is 1-5.) No. n/Mask (n is 1-5.) No. n/Mode (n is 1-5.) Off* Accept Reject Sets the IP address for Filter n. Sets the address mask for Filter n. Disables the feature for Filter n. Accepts an access from the specified IP address. Rejects an access from the specified IP address. NOTE: This item is only available for LPD or Port9100. Reset LAN Purpose: To initialize network data stored in NVM (non-volatile memory). After executing this function and rebooting the printer, all network settings are reset to their default values. 130 Understanding the Printer Menus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

Protocol
Purpose:
To enable or disable each protocol.
The change takes effect after the printer is turned off and then on.
Values:
LPD
Enable*
Enables the Line Printer Daemon (LPD) port.
Disable
Disables the LPD port.
Port9100
Enable*
Enables the Port9100 port.
Disable
Disables the Port9100 port.
WSD
Enable*
Enables the Web Services on Devices (WSD) port.
Disable
Disables the WSD port.
SNMP UDP
Enable*
Enables the UDP port.
Disable
Disables the UDP port.
E-Mail Alert
Enable*
Enables the E-mail Alert feature.
Disable
Disables the E-mail Alert feature.
EWS
Enable*
Enables an access to
Dell Printer Configuration Web Tool
embedded in the printer.
Disable
Disables an access to
Dell Printer Configuration Web Tool
embedded in the printer.
Bonjour (mDNS) Enable*
Enables the Bonjour (mDNS).
Disable
Disables the Bonjour (mDNS).
IP Filter
Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP
addresses. The change takes effect after the printer is turned off and then on.
Values:
No. n/Address
(n is 1-5.)
Sets the IP address for Filter
n
.
No. n/Mask
(n is 1-5.)
Sets the address mask for Filter
n
.
No. n/Mode
(n is 1-5.)
Off*
Accept
Disables the
feature for Filter
n
.
Accepts an access from the specified IP address.
Reject
Rejects an access from the specified IP address.
NOTE:
This item is only available for
LPD
or
Port9100
.
Reset LAN
Purpose:
To initialize network data stored in NVM (non-volatile memory). After executing this function and rebooting the
printer, all network settings are reset to their default values.
Understanding the Printer Menus
130