Dell DR4300 DR Series System Administrator Guide - Page 35

Logging in and Initializing the DR Series System, Accessing iDRAC6/iDRAC7 Using RACADM

Get Dell DR4300 PDF manuals and user guides View all Dell DR4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

management functions for the DR Series system. iDRAC connections are configured using console redirection and the iDRAC6/7 web interface. The login values you can use for making iDRAC connections are: • Default username: root • Default password: calvin • Default static IP address: 192.168.0.120 For information on how to configure the iDRAC, see the Dell RACADM Reference Guides at support.dell.com/manuals and Accessing iDRAC6/iDRAC7 Using RACADM. When the Dell DR Series System splash screen is displayed, you are ready to begin initialization using the DR Series system CLI login process. For more information, see Logging in and Initializing the DR Series System. Logging in and Initializing the DR Series System Use the DR Series system CLI and the Initial System Configuration Wizard to log in to and initialize the system. After completing a local console or iDRAC connection, log in to the DR Series system CLI: 1. Launch a terminal emulator application (like PuTTY), and type the default IP address for the DR Series system (if you are not using iDRAC or local console). 2. At the login as: prompt, type administrator, and press . 3. At the administrator@ password: prompt, type the default administrator password (St0r@ge!), and press . The Initial System Configuration Wizard window is displayed. Figure 8. Initial System Configuration Wizard Window 4. To configure the network settings, type y (for yes), and press . 5. To configure the use of the default IP address that ships with the system, choose to use static IP addressing. To do this, at the DHCP prompt, type no (this selects static IP addressing), and press . NOTE: When you select static IP addressing, you are prompted to type the static IP address (for example, you could use the default IP, 10.77.88.99) for the system, and press . If your network supports the use of DHCP, type yes at the DHCP prompt, press , and respond to any prompts. 6. To configure a subnet mask address, type the subnet mask address you want to use (for example, you could use the default subnet mask address, 255.0.0.0), and press . 7. To configure a default gateway address, type the default gateway address you want to use (for example, 10.10.20.10), and press . 8. To configure a DNS Suffix, type the DNS suffix you want to use (for example, storage.local), and press . 9. To configure a primary DNS server IP address, type an IP address you want to use for the primary DNS server (for example, 10.10.10.10), and press . 10. (Optional) To configure a secondary DNS server IP address, type y (for yes), and press . If you responded yes, type an IP address you want to use for the secondary DNS server (for example, 10.10.10.11), and press . 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
management functions for the DR Series system. iDRAC connections are configured using console redirection and the
iDRAC6/7 web interface. The login values you can use for making iDRAC connections are:
•
Default username:
root
•
Default password:
calvin
•
Default static IP address:
192.168.0.120
For information on how to configure the iDRAC, see the Dell RACADM Reference Guides at
support.dell.com/manuals
and
Accessing iDRAC6/iDRAC7 Using RACADM
.
When the
Dell DR Series System
splash screen is displayed, you are ready to begin initialization using the DR Series
system CLI login process. For more information, see
Logging in and Initializing the DR Series System
.
Logging in and Initializing the DR Series System
Use the DR Series system CLI and the
Initial System Configuration Wizard
to log in to and initialize the system. After
completing a local console or iDRAC connection, log in to the DR Series system CLI:
1.
Launch a terminal emulator application (like PuTTY), and type the default IP address for the DR Series system (if
you are not using iDRAC or local console).
2.
At the
login as:
prompt, type
administrator
, and press
<Enter>
.
3.
At the
administrator@<system_name> password:
prompt, type the default administrator password (
St0r@ge!
), and
press
<Enter>
.
The
Initial System Configuration Wizard
window is displayed.
Figure 8. Initial System Configuration Wizard Window
4.
To configure the network settings, type
y
(for yes), and press
<Enter>
.
5.
To configure the use of the default IP address that ships with the system, choose to use static IP addressing.
To do this, at the DHCP prompt, type
no
(this selects static IP addressing), and press
<Enter>
.
NOTE:
When you select static IP addressing, you are prompted to type the static IP address (for example, you
could use the default IP, 10.77.88.99) for the system, and press
<Enter>
. If your network supports the use of
DHCP, type
yes
at the DHCP prompt, press
<Enter>
, and respond to any prompts.
6.
To configure a subnet mask address, type the subnet mask address you want to use (for example, you could use
the default subnet mask address, 255.0.0.0), and press
<Enter>
.
7.
To configure a default gateway address, type the default gateway address you want to use (for example,
10.10.20.10), and press
<Enter>
.
8.
To configure a DNS Suffix, type the DNS suffix you want to use (for example, storage.local), and press
<Enter>
.
9.
To configure a primary DNS server IP address, type an IP address you want to use for the primary DNS server (for
example, 10.10.10.10), and press
<Enter>
.
10.
(Optional) To configure a secondary DNS server IP address, type
y
(for yes), and press
<Enter>
.
If you responded
yes
, type an IP address you want to use for the secondary DNS server (for example, 10.10.10.11),
and press
<Enter>
.
35