Dell Force10 S4810P Quick Start Guide - Page 20
Con a Management Route, Con a Username and Password
View all Dell Force10 S4810P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Step Task Command Syntax 1 Enter INTERFACE interface ManagementEthernet mode for the slot/port Management port. 2 Assign an IP address ip address ip-address/mask to the interface. 3 Enable the interface. no shutdown Command Mode CONFIGURATION INTERFACE INTERFACE Configure a Management Route Define a path from the system to the network from which you are accessing the system remotely. Management routes are separate from IP routes and are only used to manage the system through the management port. Task Command Syntax Configure a management route ip-address/mask management route to gateway the network from which you are accessing the system. Command Mode CONFIGURATION Configure a Username and Password Configure a system username and password to access the system remotely. Task Command Syntax Configure a username username username password and password to [encryption-type] access the system remotely. Command Mode CONFIGURATION 16 Installing the Software