Dell GX260 User Guide - Page 156
PCI Cards and Serial Port Adapters: Dell OptiPlex GX260 Systems User's Guide
UPC - 683728163389
View all Dell GX260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Back to Contents Page PCI Cards and Serial Port Adapters Dell™ OptiPlex™ GX260 Systems User's Guide CAUTION: Before you begin any of the procedures in this section, follow the steps in "CAUTION: Safety Instructions." CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. Your Dell™ computer provides slots for up to four 32-bit, 33-MHz PCI cards, or three PCI cards and a serial port adapter. PCI Cards PCI Card NOTE: To meet PC99 requirements, your Dell computer uses only PCI slots. ISA cards are not supported. If you are installing or replacing a card, follow the procedures in the next section. If you are removing but not replacing a card, see "Removing a Card." Installing a PCI Card CAUTION: Before you perform this procedure, see "CAUTION: Safety Instructions." 1. If you are replacing a card, remove the current driver for the card from the operating system. 2. Perform an orderly computer shutdown using the operating system menu. NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack. 3. Turn off any attached devices and disconnect them from their electrical outlets. 4. Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board. 5. Open the computer cover. 6. Press the lever on the card retention arm and raise the retention arm. Raising the Retention Arm and Installing a Card