Dell Inspiron 14 5420 Service Manual - Page 26

Removing the M.2 2280 solid-state drive, Steps, Next steps, Prerequisites

Get Dell Inspiron 14 5420 PDF manuals and user guides View all Dell Inspiron 14 5420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Steps 1. Align the round notch on the M.2 2230 solid-state drive with the screw (M2x2) on the M.2 2230 solid-state drive bracket. 2. Tighten the screw (M2x1.8) that secures the M.2 2230 solid-state drive to the M.2 2230 solid-state drive bracket. 3. Turn over the M.2 2230 solid-state drive bracket. 4. Slide the M.2 2230 solid-state drive bracket into the M.2 card slot on the system board. 5. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive bracket to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 26 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Steps
1.
Align the round notch on the M.2 2230 solid-state drive with the screw (M2x2) on the M.2 2230 solid-state drive bracket.
2.
Tighten the screw (M2x1.8) that secures the M.2 2230 solid-state drive to the M.2 2230 solid-state drive bracket.
3.
Turn over the M.2 2230 solid-state drive bracket.
4.
Slide the M.2 2230 solid-state drive bracket into the M.2 card slot on the system board.
5.
Replace the screw (M2x3) that secures the M.2 2230 solid-state drive bracket to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Removing the M.2 2280 solid-state drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
26
Removing and installing components