Dell Inspiron 14 5420 Service Manual - Page 56
Adhere the tape that secures the display cable to the system board.
View all Dell Inspiron 14 5420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Steps 1. Install the system board at an angle and ensure that the ports are properly aligned with the port openings. 2. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x1.8) that secure the system board to the palm-rest and keyboard assembly. 4. Connect the display cable to the system board and close the latch to secure the cable. 5. Adhere the tape that secures the display cable to the system board. 56 Removing and installing components
Steps
1.
Install the system board at an angle and ensure that the ports are properly aligned with the port openings.
2.
Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M2x1.8) that secure the system board to the palm-rest and keyboard assembly.
4.
Connect the display cable to the system board and close the latch to secure the cable.
5.
Adhere the tape that secures the display cable to the system board.
56
Removing and installing components