Dell Inspiron 14 5420 Service Manual - Page 36
Pry open the right display hinge at an angle of 90 degrees.
View all Dell Inspiron 14 5420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Steps 1. Peel the tape that secures the display-cable connector latch to the system board. 2. Lift the latch and disconnect the display-cable from the connector on the system board. 3. Remove the two screws (M2.5x4) that secure the right display hinge to the system board. 4. Pry open the right display hinge at an angle of 90 degrees. 36 Removing and installing components
Steps
1.
Peel the tape that secures the display-cable connector latch to the system board.
2.
Lift the latch and disconnect the display-cable from the connector on the system board.
3.
Remove the two screws (M2.5x4) that secure the right display hinge to the system board.
4.
Pry open the right display hinge at an angle of 90 degrees.
36
Removing and installing components