Dell Inspiron 14Z 5423 Owner's Manual - Page 17
Replacing the Optical-Drive Assembly, Procedure, Postrequisites
View all Dell Inspiron 14Z 5423 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
6 Replacing the Optical-Drive Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Procedure 1 Align the tabs on the optical-drive bezel with the slots on the optical drive and snap it into place. 2 Align the screw holes on the optical-drive bracket with the screw holes on the optical drive. 3 Replace the screws that secure the optical-drive bracket to the optical drive. 4 Slide the optical-drive assembly into position and ensure that the screw hole on the optical-drive bracket aligns with the screw hole on computer base. Postrequisites 1 Follow the instructions from step 3 to step 4 in "Replacing the Memory Module(s)" on page 13. 2 Follow the instructions in "After Working Inside Your Computer" on page 9. Replacing the Optical-Drive Assembly | 17