Dell Inspiron 14Z 5423 Owner's Manual - Page 41
Replacing the Wireless Mini-Card, Procedure
View all Dell Inspiron 14Z 5423 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
16 Replacing the Wireless Mini-Card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Procedure CAUTION: To avoid damage to the mini-card, ensure that no cables are placed under the wireless mini-card. 1 Align the notch on the Mini-Card with the tab on the system-board connector. 2 Insert the Mini-Card connector at a 45-degree angle into the connector on the system board. 3 Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board. 4 Connect the antenna cables to the Mini-Card. The following table provides the antenna cable color schemes for the Mini-Card supported by your computer. Connectors on the mini-card Antenna cable color schemes WLAN + Bluetooth (2 cables) Main WLAN + Bluetooth (white triangle) white Auxiliary WLAN + Bluetooth (black triangle) black Replacing the Wireless Mini-Card | 41